Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

HK1837 Offline
#1 Posted : Thursday, 31 December 2015 2:38:06 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 13,340

Thanks: 1 times
Was thanked: 209 time(s) in 201 post(s)
Guys

Looking for the following heads. Some are to make up a pair, some are simply to get heads to cc the chambers as i'm recording all the SBC heads fitted to Holden or Statesman. Heads need to be standard, so no chamber work, no big valves or no port work. Some can be cracked as stated below.

3927188. I need one of these, cracked or not to confirm the chamber size of the Canadian HK GTS327 engine. Head must be made in Canada.

3919291. I'm looking for a good one of these to make up a pair. As I have a good 291 I could use it on the passenger side and use a 462 on the driver's side. The only difference is the temperature sender boss on the 291. Would prefer another 291 though if possible.

3947041. Looking for one of these to get the HT GTS350 manual engine's correct cc size. Cracked is fine. I have access to a 3927186 to cc for the HDT alternate head but not sure if it is a virgin head or not. All of these should be Tonawanda cast, but should have a big T under the rocker covers. Most 3927186 examples will be Flint heads.

3973370. Need one of these also for the last of the HG GTS350 manual engines. I assume the head will be made in Canada. Almost impossible to find this head in Canada or the USA.

3932441. I have a Tonawanda one of these for HT-HG GTS350 auto, and a Flint example as well but I need a Canadian one of these for early HQ. Just want to check if they are different. The Tonawanda and Flint heads are slightly different so the St Catharine's (Canadian) head may be different again.

3998993. Need a Canadian one of these for later HQ.

I already have:

3911032 for HK-HT 307.
3917290 for 1968 Impala/Parisienne and HK GTS327 Tonawanda engine.
3932441 Tonawanda for HT-HG GTS350 auto. Could do with another of these to make up a pair.
3973487 Canadian for middle HQ. Could do with another of these to make up a pair.

Also trying to find what heads the GMH assembled 1967 Impala/Parisienne had on them. This is a rare engine in the USA so no info around. I think the heads will be 3891492, 3876775 3837775, 3814482 or maybe 3854520. It'll depend upon whether these are Canadian engines or Tonawanda and whether they are 8.5:1 or 9:1, unfortunately GMH quote the same 8.75:1 that they claim for the 1968 engine which is wrong (it is 9:1-ish). I think the intake is a Tonawanda 3905393 regardless of whether the engine is Canadian or Tonawanda built.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
adam PERTH Offline
#2 Posted : Friday, 1 January 2016 3:31:53 PM(UTC)
adam PERTH

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 3/08/2007(UTC)
Posts: 1,902

without digging up my chev book which I cant seem to find, the 492 head your referring to is that the angled plug head? also sometimes called the "turbo" head?
Old holdens brought on the spot, quick decision, cash paid.
HK1837 Offline
#3 Posted : Friday, 1 January 2016 4:15:34 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 13,340

Thanks: 1 times
Was thanked: 209 time(s) in 201 post(s)
I can't see a 492 in my post? 462 yes, it is the 1962-1967 327 275hp and 300hp head plus the 1967 350 295hp head. Also used on 1967 Z28 302 and 327 325hp and 350hp but with 202/1.6 valves. There are a few different casting numbers:

3767462 (these are only small valve 70cc heads and not what i'm after).
3782462
3814462
3890462

The slant plug turbo head is a 340292. I have 4 of these in the shed.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
camaroTT400 Offline
#4 Posted : Wednesday, 24 August 2016 8:13:51 PM(UTC)
camaroTT400

Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2016(UTC)
Posts: 15
Australia
Location: adelaide

Thanks: 5 times
Was thanked: 2 time(s) in 2 post(s)
Hi Hk1837 i have a couple sets of 3927188 heads
HK1837 Offline
#5 Posted : Wednesday, 24 August 2016 8:30:23 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 13,340

Thanks: 1 times
Was thanked: 209 time(s) in 201 post(s)
I'll PM you later
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2020, Yet Another Forum.NET
This page was generated in 0.166 seconds.