Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

HK1837 Offline
#1 Posted : Tuesday, 10 July 2018 7:04:20 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 12,316

Thanks: 1 times
Was thanked: 107 time(s) in 105 post(s)
Just looking for what is the latest (or old but best) ideas on what to spray/pour inside the HK's quarters, doors and other hidden nooks before I seal it with interior. I know I can get to other spots later (like access from the boot area, or spray into the sills from clip holes or drain holes) but some of it is best done now while there is zero trim in it other than the headlining. What i'm talking about is mainly behind rust repair sections especially areas like in the quarter between the door and the wheel.

In years gone by I've used fish oil and Tectyl, but this was over 20 years ago, only had new cars since. My HJ Premier was done by James Rustproofing in Newcastle when it was new and it has never had rust and been a coastal car all its life, so whatever that was it must have been good!

On my hatchback I used Fertan (phosphoric acid) and let it dry, this was to convert any surface rust that may have been lurking, then fish oil. But the car stunk for months. Having said that though this Monaro won't be driven for another year at best, so the smell should go by then if fish oil is the best.

Any suggestions?
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
HK1837 Offline
#2 Posted : Tuesday, 10 July 2018 4:43:41 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 12,316

Thanks: 1 times
Was thanked: 107 time(s) in 105 post(s)
I was recommended this stuff today:

https://knockout-rust.com.au
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
KBM Offline
#3 Posted : Tuesday, 10 July 2018 7:06:41 PM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 195
Australia
Location: Tolmie

Thanks: 1 times
Was thanked: 5 time(s) in 5 post(s)
lanolin and fish oil have been used for many good products. lanox is excellent for rust proofing and lube and is basically made up of those two ingredients. add that to bitumen and sounds like a product our dads would've bought back when... 5lt looks like it's worth a try. saying that after I rust repaired my van I coated it with bitumas black, which is used for sealing water tanks and retaining walls.

Edited by user Tuesday, 10 July 2018 7:11:46 PM(UTC)  | Reason: more info

HK1837 Offline
#4 Posted : Tuesday, 10 July 2018 7:18:48 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 12,316

Thanks: 1 times
Was thanked: 107 time(s) in 105 post(s)
I emailed them and asked if it is fit for my purpose, and rather than blow smoke up their own product they told me to get a can and try it, and offered the advice that it will penetrate seams and double metal areas like fish oil does but won't drip out forever and re-drip on hot days like fish oil does. Sounds like it is worth a go. I'll put all the black plugs in the door frame perimeter first and spray it and see how it goes in there before I cut loose in the quarters.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
castellan Offline
#5 Posted : Wednesday, 11 July 2018 11:39:28 AM(UTC)
castellan

Rank: Veteran

Reputation:

Groups: Registered
Joined: 26/02/2009(UTC)
Posts: 1,143

Thanks: 11 times
Was thanked: 11 time(s) in 10 post(s)
Penetrol maybe good for un rusted steel.
I have no rust in any of my cars.

But there was a product a mate used for his old HK Monaro it went over and sealed rust in he said, so you cut back what rust you could and the little bits that you could not truly deal with, you hit it with this stuff, but it was very expensive, his 2ed car he did he asked to use that same stuff and the dude doing it refused said it was to expensive, mate said he did not give a fook but old mate refused saying what he was using was good enough.
Premier 350 Offline
#6 Posted : Wednesday, 11 July 2018 12:53:45 PM(UTC)
Premier 350

Rank: Member

Reputation:

Groups: Registered
Joined: 2/02/2009(UTC)
Posts: 497
Man
Australia
Location: On a build over WWII airfield. Got the .50 cal cases from my driveway to prove it

Thanks: 6 times
Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: castellan Go to Quoted Post
Penetrol maybe good for un rusted steel.
I have no rust in any of my cars.

But there was a product a mate used for his old HK Monaro it went over and sealed rust in he said, so you cut back what rust you could and the little bits that you could not truly deal with, you hit it with this stuff, but it was very expensive, his 2ed car he did he asked to use that same stuff and the dude doing it refused said it was to expensive, mate said he did not give a fook but old mate refused saying what he was using was good enough.


POR-15, is the stuff you're thinking of? Eastwood also make an encapsulator. Not sure how effective they'll be for your application. Plan B: Tectyl. Valvoline sell an aerosol version, or theres the company website.



http://www.tectylproduct...bout_tectylproducts.html
Attn camry drivers. The accelerator is the skinny pedal on the right.
nineteenfortyeight Offline
#7 Posted : Sunday, 22 July 2018 8:30:24 AM(UTC)
nineteenfortyeight

Rank: Member

Reputation:

Groups: Registered
Joined: 7/09/2016(UTC)
Posts: 65
Man
Australia
Location: Blackbutt Queensland

Thanks: 9 times
My HG Ute was done with Fisholene back in 1970 according to the 2nd owner. He bought it when it was 11 months old in 71 when his work mate couldn't afford the repayments and immediately hit the rear quarters, doors and guards with Fisholene. The only rust I found in it was under the rear screen rubber and that was repaired about 9 years ago.
I have used 'Fish Oil' which I think is not the same as 'Fisholene'. I have no idea if it is as good as Fisholene though. Anyone else used Fish OIl?

48 215
HK1837 Offline
#8 Posted : Sunday, 22 July 2018 8:42:14 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 12,316

Thanks: 1 times
Was thanked: 107 time(s) in 105 post(s)
I bought some of the Ferguson's knockout rust (see post 2) and will try it.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2018, Yet Another Forum.NET
This page was generated in 0.188 seconds.