Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

nineteenfortyeight Offline
#1 Posted : Thursday, 31 December 2020 12:43:18 PM(UTC)
nineteenfortyeight

Rank: Member

Reputation:

Groups: Registered
Joined: 7/09/2016(UTC)
Posts: 130
Man
Australia
Location: Blackbutt Queensland

Thanks: 9 times
Was thanked: 1 time(s) in 1 post(s)
Can anyone tell me the length of the spacer or spacers on the outrigger mounting bolt? I couldn't get the bolt out as the spacers were frozen/rusted onto the bolt. It was eventually hammered out requiring repairing of the hole in the tie rail. It had 2 spacers on the bolt of equal length. I seem to recall that the 2 spacers were of unequal length? I haven't been able to find the dimensions anywhere? Also, the other mounting bolts spacers have rubber around the outside. They are currently at the top of each spacer and touching. From memory they should be spaced apart further along the spacer?
TIA.
Ron
48 215
Flem Offline
#2 Posted : Friday, 1 January 2021 5:19:50 PM(UTC)
Flem

Rank: Member

Reputation:

Groups: Registered
Joined: 30/04/2016(UTC)
Posts: 82
Australia
Location: Canberra

Was thanked: 3 time(s) in 3 post(s)
Just Compared HG & HK parts catalogue the part # are the same. See page 240 of the HK parts Catalogue.
Includes sizes & measurements . The HG bolt and lock nut are listed in a separate section to the HK parts Catalogue.
Same part # though.
There is a very handy exploded view of the X member components in the Front Suspension section, section 3, fig. 3-2 of the HK Shop Manual
Flem
 1 user thanked Flem for this useful post.
Smitty2 on 1/01/2021(UTC)
nineteenfortyeight Offline
#3 Posted : Sunday, 3 January 2021 7:22:43 PM(UTC)
nineteenfortyeight

Rank: Member

Reputation:

Groups: Registered
Joined: 7/09/2016(UTC)
Posts: 130
Man
Australia
Location: Blackbutt Queensland

Thanks: 9 times
Was thanked: 1 time(s) in 1 post(s)
Thanks Flem. I have a text only HK Parts Catalogue but no HG Catalogue. I received an email from a friend showing Fig 3.2 out of the Green HK Book. He says the spacer is three quarter inch OD half inch ID and one and a quarter Long. I assume the two spacers are the same length? I didn't see any measurements on the drawing he sent me.
Thanks.
Ron
48 215
Flem Offline
#4 Posted : Sunday, 3 January 2021 9:33:19 PM(UTC)
Flem

Rank: Member

Reputation:

Groups: Registered
Joined: 30/04/2016(UTC)
Posts: 82
Australia
Location: Canberra

Was thanked: 3 time(s) in 3 post(s)
I’ve a spare somewhere in the shed that I can measure up for you.
Flem
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2021, Yet Another Forum.NET
This page was generated in 0.070 seconds.