Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

HQforme Offline
#1 Posted : Wednesday, 31 October 2007 3:50:18 AM(UTC)
HQforme

Rank: Member

Reputation:

Groups: Registered
Joined: 14/06/2007(UTC)
Posts: 582

Ok, ive had conflicting views on this. I've got 14x7 wheels (good old jellybeans, polished up a treat!) .... now, i'm told by the tyre shops, several, that the widest i can go is 225, and that 225/14 is near impossible to find. Yet i've often seen, and talked to many people, running 235 or 245 on 7inch rims for years without drama.

Now, are the tyre shops erring too far on the side of caution due to liability, or is it sound advice? The risk of the tyre rolling off under high loadings is understandable, but i've got a mild 202 powered HQ Kingswood in the build. A high speed, high lateral load corner carver it certainly is not!

Or is is it a case of yes, it's doable, but on a 14 inch rim, rather than the possibly more suitable 15, there's greater risk?

Any thoughts please? If there's any doubt i'll of course go with the shop's advice.

Peter.
"Silly modern cars"
cloudy Offline
#2 Posted : Wednesday, 31 October 2007 4:09:46 AM(UTC)
cloudy

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 2,047

going over 225 will not allow the tyre to sit correctly on the road , this will cause uneven tread wear and possibly handling problems as well.
HK1837 Offline
#3 Posted : Wednesday, 31 October 2007 5:16:40 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,901

Thanks: 1 times
Was thanked: 559 time(s) in 534 post(s)
245/50/14 should fit on a 7". I used to run that combo all the time. Also used to run 235/60/14. But I'm no tyre expert.

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
HK1837 Offline
#4 Posted : Wednesday, 31 October 2007 5:16:40 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,901

Thanks: 1 times
Was thanked: 559 time(s) in 534 post(s)
245/50/14 should fit on a 7". I used to run that combo all the time. Also used to run 235/60/14. But Im no tyre expert.

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
memryz Offline
#5 Posted : Wednesday, 31 October 2007 5:27:42 AM(UTC)
memryz

Rank: Member

Reputation:

Groups: Registered
Joined: 29/04/2006(UTC)
Posts: 27

235/60/14 is what I would usually run on 7's On your average V8 HQ you dont normally have any adverse effects. or bad tread wear. 245s will go on too. but yeah can roll abit on hard cornering.... but then again the man at the shop should be the expert aye
memryz Offline
#6 Posted : Wednesday, 31 October 2007 5:27:42 AM(UTC)
memryz

Rank: Member

Reputation:

Groups: Registered
Joined: 29/04/2006(UTC)
Posts: 27

235/60/14 is what I would usually run on 7s On your average V8 HQ you dont normally have any adverse effects. or bad tread wear. 245s will go on too. but yeah can roll abit on hard cornering.... but then again the man at the shop should be the expert aye
HQforme Offline
#7 Posted : Thursday, 1 November 2007 2:16:07 AM(UTC)
HQforme

Rank: Member

Reputation:

Groups: Registered
Joined: 14/06/2007(UTC)
Posts: 582

Cheers for the input guys. It remains a close call. All of the real world experience of many people who've run these widths, versus the guys who know best, but are strangled by liability. Hmm.....
"Silly modern cars"
HQforme Offline
#8 Posted : Thursday, 1 November 2007 2:16:07 AM(UTC)
HQforme

Rank: Member

Reputation:

Groups: Registered
Joined: 14/06/2007(UTC)
Posts: 582

Cheers for the input guys. It remains a close call. All of the real world experience of many people whove run these widths, versus the guys who know best, but are strangled by liability. Hmm.....
"Silly modern cars"
keithholden Offline
#9 Posted : Thursday, 1 November 2007 6:21:18 AM(UTC)
keithholden

Rank: Member

Reputation:

Groups: Registered
Joined: 31/08/2005(UTC)
Posts: 349

Thanks: 1 times
http://img217.imageshack...hp?image=mvc017fhs8.jpg

http://img116.imageshack...hp?image=mvc016ffm1.jpg

We dont worrie about these things yet lol. I have 265-50-14s eagers on my 7 inch rims at the back and 245-50-14s on the front of my hq. N

Edited by user Thursday, 1 November 2007 6:25:06 AM(UTC)  | Reason: Not specified

If its not broke it will be soon
hx-sandman Offline
#10 Posted : Thursday, 1 November 2007 8:54:52 PM(UTC)
hx-sandman

Rank: Member

Reputation:

Groups: Registered
Joined: 24/07/2005(UTC)
Posts: 158

I ran 235/60/14 on my WB ute with 7" rims with no dramas over several years. Also have never had any problems finding 225/14s. Most major places can order them in within a day or two.
hx-sandman Offline
#11 Posted : Thursday, 1 November 2007 8:54:52 PM(UTC)
hx-sandman

Rank: Member

Reputation:

Groups: Registered
Joined: 24/07/2005(UTC)
Posts: 158

I ran 235/60/14 on my WB ute with 7" rims with no dramas over several years. Also have never had any problems finding 225/14's. Most major places can order them in within a day or two.
adam PERTH Offline
#12 Posted : Thursday, 1 November 2007 9:20:17 PM(UTC)
adam PERTH

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 3/08/2007(UTC)
Posts: 1,902

i am with cloudy, 225. especially on the front.
Any wider, they dont drive as well.
235 / 60 on rears ok, @ 7"

A1 Bogan.
Old holdens brought on the spot, quick decision, cash paid.
adam PERTH Offline
#13 Posted : Thursday, 1 November 2007 9:20:17 PM(UTC)
adam PERTH

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 3/08/2007(UTC)
Posts: 1,902

i am with cloudy, 225. especially on the front.
Any wider, they don't drive as well.
235 / 60 on rears ok, @ 7"

A1 Bogan.
Old holdens brought on the spot, quick decision, cash paid.
jabba Offline
#14 Posted : Friday, 2 November 2007 12:37:42 AM(UTC)
jabba

Rank: Member

Reputation:

Groups: Registered
Joined: 17/04/2005(UTC)
Posts: 465

Currently running 235/60/14 all round on the old honecomb 14 x 7s, and although a mite heavy (non-PS HJ Naro 350SBC) they seem fine. They certainly dont look too bulgy.

__________________________________________
Keep the shiny side up, and the greasy

Edited by user Friday, 2 November 2007 12:38:28 AM(UTC)  | Reason: Not specified

__________________________________________
Keep the shiny side up, and the greasy side down.
jabba Offline
#15 Posted : Friday, 2 November 2007 12:37:42 AM(UTC)
jabba

Rank: Member

Reputation:

Groups: Registered
Joined: 17/04/2005(UTC)
Posts: 465

Currently running 235/60/14 all round on the old honecomb 14 x 7's, and although a mite heavy (non-PS HJ 'Naro 350SBC) they seem fine. They certainly don't look too bulgy.

__________________________________________
Keep the shiny side up, and the gre

Edited by user Friday, 2 November 2007 12:38:28 AM(UTC)  | Reason: Not specified

__________________________________________
Keep the shiny side up, and the greasy side down.
80737k Offline
#16 Posted : Friday, 2 November 2007 2:33:05 AM(UTC)
80737k

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 4/12/2005(UTC)
Posts: 1,062
Man
Australia
Location: western victoria

http://www.yokohama.com....gCharts/chart_y352.aspx

The link above is specific to Yokohama's 352 series tyres.
I run 265/50/14 and 245/50/14 tyres on 7" rims (XW sedan). The link above states my 265/50/14's are good for 7 to 10" rims.
P

Edited by user Friday, 2 November 2007 2:39:11 AM(UTC)  | Reason: Not specified

Fossil fuels are YUMMY !
80737k Offline
#17 Posted : Friday, 2 November 2007 2:33:05 AM(UTC)
80737k

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 4/12/2005(UTC)
Posts: 1,062
Man
Australia
Location: western victoria

http://www.yokohama.com....gCharts/chart_y352.aspx

The link above is specific to Yokohamas 352 series tyres.
I run 265/50/14 and 245/50/14 tyres on 7" rims (XW sedan). The link above states my 265/50/14s are good for 7 to 10" rims.
Pro

Edited by user Friday, 2 November 2007 2:39:11 AM(UTC)  | Reason: Not specified

Fossil fuels are YUMMY !
Jim5.0 Offline
#18 Posted : Saturday, 3 November 2007 7:09:21 AM(UTC)
Jim5.0

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 2,898

Was thanked: 2 time(s) in 2 post(s)
I enquired about this in the 1980's. I had 14X6.5 wheels on my Charger & was told that the smallest tyre I could legally use was a 185 and the largest was a 245.

I lived in the ACT and all rims on your car had to be the same width, offset and const

Jim5.0 Offline
#19 Posted : Saturday, 3 November 2007 7:09:21 AM(UTC)
Jim5.0

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 2,898

Was thanked: 2 time(s) in 2 post(s)
I enquired about this in the 1980s. I had 14X6.5 wheels on my Charger & was told that the smallest tyre I could legally use was a 185 and the largest was a 245.

I lived in the ACT and all rims on your car had to be the same width, offset and constr

Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2025, Yet Another Forum.NET
This page was generated in 0.066 seconds.