Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
Hi All
I am looking to pick better brains than mine.
I would like to try and get a little more out of the HJ 308 in a GTS/4 (partial pollution).
At the moment it has:
A mild cam pacemaker extractors Recon rochester carb.
Just in case its relevant, running supra 5 speed and, i think, 2.38 diff and goes nice when all 4 barrels are open.
Everything is running well but a little more poke off the line would be great.
I know its a very general question but has anyone got some ideas?
Thanks
Mark
I am not allowed a mistress so i got a GTS - and its better |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Member
Groups: Registered
Joined: 14/06/2007(UTC) Posts: 582
|
Poke off the line? Lower diff gears. Depending on the ratios in the 5 speed, youd probably still be fine down the freeway (if you do that often) even with something in the low to mid 3s in the diff. |
"Silly modern cars" |
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC) Posts: 14,895
Thanks: 1 times Was thanked: 554 time(s) in 529 post(s)
|
A 2.78 diff with a 5spd as HQforme says is not the best combo, although 1st gear in a Supra with the 2.78 probably ends up the same as an M21 with a 3.36. Id look towards a 3.36 anyway.
_______________________________________________________ If we all |
_______________________________________________________ If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
Rank: Member
Groups: Registered
Joined: 16/10/2008(UTC) Posts: 180
|
HJHeaven, what type of diff are you running? i have a few ratios around here somewhere.. let me know what type of diff. Cheers
Cheers, James |
Cheers, James |
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
Thanks everyone.
Pont69, I think it might be the 2.78 (but only based on the fact that this was what was originally in the car).
Is there anyway i can tell be looking at it from the outside?
Mark
I am not allowed a mistress so i got a GTS - a |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
To the cheese eating surrender monkey,
Thank you for your observation. I just wasted a few seconds of my life reading your response which could have been better spent plucking nasal hair.
.....and now I will never get those seconds back.
I am n |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Member
Groups: Registered
Joined: 6/01/2009(UTC) Posts: 119
|
quote: Originally posted by HJHeaven
Thanks everyone.
Pont69, I think it might be the 2.78 (but only based on the fact thatEdited by user Saturday, 7 March 2009 1:13:08 AM(UTC)
| Reason: Not specified
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 2/06/2006(UTC) Posts: 1,664
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
Hi H81837Q
Thanks for that, Ill have a look.
I think roughly, about 2500 - 2800 for 100km per hour.
Havent looked that recently.
Mark
I am not allowed a mistress so i got a GTS - and its better |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Member
Groups: Registered
Joined: 16/10/2008(UTC) Posts: 180
|
hey mate. I have a banjo 3.55 centre here. and if your after a salisbury centre.. for the right $$$ ill part with my 3.55 LSD ute centre.
Cheers, James |
Cheers, James |
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
Thanks James
Whats the difference between the Banjo and Salisbury - is it different sizes and casings?
Which one would slip stratight in?
Mark
I am not allowed a mistress so i got a GTS - and its better |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Member
Groups: Registered
Joined: 6/01/2009(UTC) Posts: 119
|
quote: Originally posted by HJHeaven
Hi H81837Q
Thanks for that, Ill have a look.
I think roughly, about 2500 - 2800 for
|
|
|
|
Rank: Member
Groups: Registered
Joined: 16/10/2008(UTC) Posts: 180
|
hey HJ. Depends whether you have a sal or banjo?
im not sure about your model.. i only know bout the HQ premier :p seeing as thats all i have. Let me know. and ill see what we can do
Cheers, James |
Cheers, James |
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
Hi guys
taken me a while to get off me behind.
Where am i looking on the diff for the identifier telling me what model it is.
Is it on the back, top/bottom or side or from top/bottom.
Thanks
Mark
I am not allowed a mistress so i got a GT |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2005(UTC) Posts: 243
|
2.78 with supra 5 spd (depending on tyres) would be doing 1900revs at 100km appox. 5th gear is a 20 percent o/drive.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
That seems to be about bang on, Musksell.
I will get it up this arvo and double check.
Then I might be in the market for 3.36 or 3.55 gearing - anyone got anything (Pont69, i think you said you did)?
I am not allowed a mistress so i got a GTS - a |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 2/06/2006(UTC) Posts: 1,664
|
if its a sailsbury 10 bolt it will have a plate that comes off... inside on the crown wheel will tell the ratio not sure of other models
|
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
Hi guys,
Done some checking today.
Turns out, i already have a 3.55 sal and am doing about 2300 - 2400rpm for 100kmh.
That means then, 308, mild cam, rochester, extractors, 3 inch twin system, 5 speed supra box, 3.55 sal diff.
I spose based o |
A GTS/4 is a monaro - so nuuur |
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2008(UTC) Posts: 172
|
Hi all
I should say that i plan on stroking it at some time in the future, so something compatible with that would likely be best.
Mark
I am not allowed a mistress so i got a GTS - and its better |
A GTS/4 is a monaro - so nuuur |
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.