Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

HKBro Offline
#1 Posted : Wednesday, 12 July 2017 4:48:35 PM(UTC)
HKBro

Rank: Member

Reputation:

Groups: Registered
Joined: 15/05/2014(UTC)
Posts: 9

Help required to decipher the VIN and identification plates on my HK. Some of it I can work out but the rest confuses me.

The Identification plates reads:

BODY 81469KR-00302-H5
TRIM 1146-14M
PAINT 587-1286
INSERT "BLANK"
TOP "BLANK"

Stamped under the identification plate is":
HK 25285


VIN Plate reads:
81469HK531181

I have worked out that it is a holden (8) (Doh), a Brougham (81469), HK (K) ???? (R), 00302 (Sequence number 302), H5 - Pagewood NSW.

Trim number 1146-14M ???
Paint number 587-1286 ???

What is the TOP and INSERT lines for?

The Vin number tells me it is a Holden Brougham, HK, Pagewood manufacture but the 1181 I have no idea.

Also what then is the number stamped in the firewall? All it tells me is that it is a HK.

Any information would be appreciated. Thanks in advance

Alan
HK1837 Offline
#2 Posted : Wednesday, 12 July 2017 5:11:36 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
You are not far off the mark.

8 is GMH, not Holden. It covers other stuff built by GMH like Torana, Bedford, Chev trucks etc too.

14 is Brougham

K is H.

R is RH drive.

302 is the 302nd HK Brougham body out of the Pagewood body plant.

H5 is Pagewood location.

1146 is the exterior paint combination code. 14M is the interior trim. 1146 is Hacienda Blue metallic. The K, L, M, N trims are a bit of a funny setup with Brougham. 14 is Jacanda blue, the M is from memory cloth on both seats and door trims. Have a read here: http://www.fastlane.com....8780_hg-trim-codes.aspx

587-1286 is the refinish paint code for the main part of the body. In this case a metallic.

INSERT isn't really used on these.

TOP would have a refinish code here if the car had say a white roof. In which case the 4 digit part of the TRIM line would be a different number to reflect white roof over other colour lower half.

HK25285 (there is SS after this, one S above the other) is the chassis number.

81469KH531181 is the VIN. 81469K means the same as it does on the body plate. H531181 is the PSN (Plant Sequence Number, Plant Serial Number or other such words). This is the key number on a GMH product. For Pagewood this started at H500000 back around 9/67 and includes all vehicles assembled at Pagewood, not built as many say. Assembled as it includes vehicles partially built at other body plants, like for example HK vans are basically half built at Elizabeth (out of the Elizabeth body plant) and finished at Pagewood assembly plant. Same for the Chev and Pontiacs, they were partially built at Woodville but assembly completed at Pagewood. Your Brougham is the 31181st vehicle with assembly completed at Pagewood since around 9/67 when the PSN system started.

By the chassis number i'd place your Brougham's body built and assembly in the second half of July 1968 as an estimate. Engine number around 30713xxx

Edited by user Wednesday, 12 July 2017 5:20:25 PM(UTC)  | Reason: Not specified

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
HKBro Offline
#3 Posted : Thursday, 13 July 2017 4:40:37 PM(UTC)
HKBro

Rank: Member

Reputation:

Groups: Registered
Joined: 15/05/2014(UTC)
Posts: 9

Thanks for the information HK1837 it is appreciated and very helpful. For some reason I thought the car was a '67 make but there you go, wrong again.

Alan
HK1837 Offline
#4 Posted : Thursday, 13 July 2017 5:55:36 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Not too many Broughams built in 1967! There will be one body, built at Woodville around September 1967 but no actual vehicle fully assembled until late April into May 1968 (assuming Brougham follows Monaro with the Woodville body development).
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.049 seconds.