Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

Johnno Offline
#1 Posted : Wednesday, 21 July 2021 6:31:01 PM(UTC)
Johnno

Rank: Newbie

Reputation:

Groups: Registered
Joined: 21/07/2021(UTC)
Posts: 2
Australia
Location: NSW

Hi Members,
I might be taking a look at a '78 HZ 253 ute on the weekend.
Don't know much about it other than it's been off the road for 10 years and garaged. I'm told the engine runs and has been started regularly.
What sort of issues should I look for? e.g. areas prone to rust, engine noises, oil leaks etc.
Thanks.
HK1837 Offline
#2 Posted : Wednesday, 21 July 2021 7:44:53 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,728

Thanks: 1 times
Was thanked: 513 time(s) in 489 post(s)
Rust. Basically everywhere. If you have to ask, you’ll struggle. Find someone to help you.

Chassis cracks. Look around the front shock towers (bits welded on where the front shocks and upper control arms mount). And where the lower control arm mounts are welded to the chassis, mainly behind the rear mount. HZ chassis steel is thinner than HQ-HX and doesn’t crack as bad but they do crack especially if it has had lowered springs and very stiff shocks fitted.

Chassis rust. Hard to see but they do rust on the top where the 4 front cabin mounts are.

If the panels are badly rusted make sure you pay less for the car, none of them are cheap any more. Good doors will cost near $750 each today.

Mechanicals are your least concern. The ideal fixer-upperer would have a great body and panels and need a mechanical rebuild.

Make sure most of it is there. Nothing is cheap any more. And you can’t just go to the wreckers and get screws, brackets, plastics etc like you could 10 years ago.

Almost forgot. Add the costs up. Be realistic. If you can’t fix rust, dents and paint you’ll be up over $15,000 for even a cheap-ass job today. Allow $2500 for rubbers, clips, window winder repairs and all that “put back together” stuff. $4000+ by the time you pay for mechanical repairs from engine through to rear axle, and that is doing most of it yourself. Shocks, rubbers, bushes, rotors, drums, wheel cylinders, master cyl, fuel tank clean, radiator, hoses. It all adds up.
Then compare those sums to a car basically ready to use. Like this for example:
https://www.gumtree.com....ctivity.copytopasteboard
This HX could be a piece of junk too, but may also be good. Just using it to show you what I mean.

Edited by user Wednesday, 21 July 2021 8:08:39 PM(UTC)  | Reason: Not specified

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Johnno Offline
#3 Posted : Wednesday, 21 July 2021 8:37:12 PM(UTC)
Johnno

Rank: Newbie

Reputation:

Groups: Registered
Joined: 21/07/2021(UTC)
Posts: 2
Australia
Location: NSW

Thanks HK1837,
That puts me in the picture.
It could be a real money pit then, but I'll still take a look.
Been there done that with other makes and models. (Managed to track down a lower control arm for a 1982 car. Seller charged like a wounded bull knowing I'd have Buckleys of finding one elsewhere. And the top strut mount needed was the last one in Australia.)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.067 seconds.