Rank: Member
Groups: Registered
Joined: 21/07/2006(UTC)
Posts: 40
|
I looking for a chrome plater in NSW. I'd like to get a couple of bumps rechromed and a wb statemans number plate surround but i want a good job. Has anyone got any suggestions?. I,ve heard triple plating is the best but i don't think anyone in NSW does it anymore this right? and is triple plating that much better than any other chrome plating?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/01/2006(UTC)
Posts: 303
|
Its in the yellowpages under electroplaters....there is one in Newcastle I plan on trying out.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 21/07/2006(UTC)
Posts: 40
|
Thanks mate ive used them before, there abit pricey but here close.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/01/2008(UTC)
Posts: 184
|
tripple chrome plating is just a 3 step process as opposed to a nickel chrome job. it uses copper as a "undercoat" for the nickel then to give the nice blue effect is chrome, nickel is yellow.Wouldnt have a clue who does it up there, I used to in queensland. But as far as using copper under nickel, whatever, its usually used as a buildup so take it or leave it.
Doc
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/03/2009(UTC)
Posts: 109
|
Blu Chrome
Address:
137 Eldridge Rd
Bankstown NSW 2200
Phone:
(02) 9790 6834
Got a lot of good feedback from them yes Hamilton Chrome are great but you pay for it, I heard reports from blu chrome similar to Hamitlon, great work but better rates
HZ
Living the Dream |
Living the Dream |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/01/2010(UTC)
Posts: 17
|
Prahran platers in Melbourne. They post interstate. was recommended them by a family member and have since recommended them to alot of ppl! there email is [email protected]
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 27/04/2009(UTC)
Posts: 3
|
Hi, There is a chrome shop in Canberra that do very good work. They also have a Counter in Ingleburn Sydney that take work in for them. I had my XY Falcon bars and Blinkers plated there and was very happy with there work. Phone them on 02 6280 4265 or i found them at www.chromeworld.net.au
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/02/2009(UTC)
Posts: 194
|
Perfection Plating in Queanbeyan do a great job, although I had to use All Metal Bumpers in Ingelburn to do the Chev bumpers (also good job) because Perfections tanks are only 1200 long and the bumpers wouldnt fit in them.
|
|
|
|
|
|
Rank: Guest
Groups: Guests
Was thanked: 5 time(s) in 5 post(s)
|
Message was deleted by a Moderator. | Reason: Not specified
|
|
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 1,991
Was thanked: 2 time(s) in 2 post(s)
|
You have to copper plate because chrome is porous and if you only chrome it the metal will rust underneath and ruin the chrome. Nickel plating is an extra precauton, for something valuable I would go the extra dollar, you can copper then nickel but nickel has a bluish tint to it, I rather like it, then you chrome over the nickel/copper, thats why the old 40s/50s cars had such good chrome, they were all triple plated.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
