Rank: Member
Groups: Registered
Joined: 3/08/2009(UTC)
Posts: 26
|
how much would it rufly cost to get a vn v6 block bored and polished if i have already got the engine out and striped its just a bare block no crank cam or pistons or bearings i need a price please even if its a estimate
[SORARE]
[SUPDUP] |
[SORARE]
[SUPDUP] |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135
Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
|
A bore & hone could be anywhere from $150 to $350 depending on where you go, how much else they do at the same time, and how bad the block is.
Cheers,
Mick
_______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
Cheers,
Mick
_______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 18/10/2007(UTC)
Posts: 897
|
you will want to give your machinist the pistons you are useing as a good one will machine each bore to each cylinder as tolerances may very. you will also need it to be chemicaly cleaned which is about $100-$150 for both heads and block. you can add assembly costs if he needs to assemble to machine deck height. |
Havent you learnt anything from that guy that gives sermons at church?...Captain whats his name. |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 14/01/2010(UTC)
Posts: 1
|
can you get the rings in a VT Commy bored out ??
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135
Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
|
OK, Im scratching my head with that one....
Boring refers to machining the cylinder bore back to an accurate circular shape, or correcting the alignment of the crank main bearing tunnel by boring it with the caps on (line boring).
What exactly do you want to do to the rings in a VT?
Cheers,
Mick
_______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
Cheers,
Mick
_______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/01/2009(UTC)
Posts: 435
Was thanked: 1 time(s) in 1 post(s)
|
Ring an engine machine shop/builder & ask them. Thats what they do. Utility8  |
utility8
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
