Rank: Member
Groups: Registered
Joined: 5/05/2006(UTC)
Posts: 54
|
What part number(s) are used for HT350 Monaro bellhousing
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,894
Thanks: 1 times
Was thanked: 554 time(s) in 529 post(s)
|
3899621. Remember that the part number isnt marked anywhere on the bellhousing though.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/05/2006(UTC)
Posts: 54
|
I have a bellhousing with 3899621 cast into the starter side out of my 1970 corvette. Would this be the same part?
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,894
Thanks: 1 times
Was thanked: 554 time(s) in 529 post(s)
|
Odd. Normally the casting number is different to the part number, sometimes by only one digit. Id say its too much of a co-incidence in that case to not be the same thing.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 28/03/2008(UTC)
Posts: 1,903
|
Hi ,Well that would be a 1 in a 3899621 chance its the right one..lol, Simmo I think its the right bell housing ,unlikely that they would have 2 different bell-housings for the same eng/gearbox setup WITH coincidentally that number.But I agree with Byron very rare that the number would be cast into a part because usually they get the part number AFTER they are made but it could be a later run request or something like that...j.m.o!...jim Jim in Adelaide...Hindsight is bad vision! Edited by user Monday, 7 December 2009 12:20:58 AM(UTC)
| Reason: Not specified |
Jim in Adelaide.. |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,894
Thanks: 1 times
Was thanked: 554 time(s) in 529 post(s)
|
Most alloy parts have a casting number, just like cast iron parts. But the casting number is for HK Saginaw V8 bellhousings for example, 1 x digit different. The double sided bellhousings (ie knockouts on both sides for left and right hand clutch forks) have both casting numbers on them for the left and right fork versions, the right fork versions number is on the left side knockout and vice versa. I thought HT were the same but maybe not by your post.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
Yes The "3899621" HT HG 350 Saginaw /HQ 350 Muncie Bell Housings have the numbers Cast into the side of them in the knock out piece, and the number matches the parts book . Byron is right though with many of these parts where the casting number on the actual parts does not match the part number in the Spare parts catalogues ,or is quite often one number out. Hope this helps James www.monaromuscleparts.com
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,894
Thanks: 1 times
Was thanked: 554 time(s) in 529 post(s)
|
James
If you ever come across one of these that is the same as the HT/HG/HQ bellhousing but is the wrong number Im looking for one. I need an 11" example for my HK to suit the 427 and Muncie, but I have ne need to run an original 1837 example, just one that looks right.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
You can now buy new repro "621" bell housings with all the numbers in the US for $189 . So you could just buy one of these at that price . The other one you have asked meabout is a 626... number from memory out of an early to mid 70s camaros etc... Cheers James www.monaromuscleparts.com
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,894
Thanks: 1 times
Was thanked: 554 time(s) in 529 post(s)
|
Sounds like a plan!
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
