Rank: Member
Groups: Registered
Joined: 21/05/2007(UTC)
Posts: 88
|
Hi all,
Finally got a one tonner for work, 308,straight gas, Turbo 400 and 9" LSD. Now the tricky bit! I've got the tipper kit to convert it to a tipper but the gas tank is fitted to the tray at the rear, so it needs to be moved to the standard spot of where the fuel tank used to be (drivers side, behind cab) and will need to get the approved tank attach brackets for this. Or, can you get a flex line fitted from the tank to a fixed union on the chassis with obviously enough travel to allow for the tray tilt angle... Help is needed !!
Cheers
Rodders
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 21/05/2007(UTC)
Posts: 88
|
Really need help on this one, does anyone know where to buy the bracket kit to fit the gas tank where the fuel tank was?
Rodders
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/07/2008(UTC)
Posts: 342
|
Have you measured the tank to see if it will fit in there first. Can't say Ive ever seen one with the tank in that position, and after playing with the fuel tank in the van the other day it looks as though you would need a pretty short tank to be able to squeeze it in there.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/07/2008(UTC)
Posts: 342
|
Here's someone wrecking a tonner with a triple tank LPG system. I guess it would probably have one at the back and one each side.
http://www.ebay.com.au/itm/hz-holden-one-tonner-wrecking-lh-lx-torana-parts-/270755781810?pt=AU_Cars&hash=item3f0a4d5cb2&clk_rvr_id=241748649642#ht_500wt_1156
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 21/05/2007(UTC)
Posts: 88
|
Hi, the tank will fit according to the workshop I went to.
I also asked the seller about the triple tank thingo and it was from an EF Falcon,not the tonner...
Rod
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135
Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
|
You can get flexible LPG rated hose. Not sure of the part number, but Enzed can get their hands on it. It has a braided cloth cover, like the old kettle cables used to have (with the white spots every now & then amongst the black threads). You'll need to have the right flare fittings crimped on by them, and have the assembly tested, before it's legal. I'm running this between the body & the motor on my Brock (convertor is mounted right behind the mixer). |
Cheers,
Mick
_______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 21/05/2007(UTC)
Posts: 88
|
Fantastic, if I can get the hose done it'll save a heap of dramas.
I'll get onto Enzed here in Melbourne and see what the go is, thanks heaps for the advice......
Rodders
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135
Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
|
If you get stuck, I should be able to get you a part number with a bit of effort. |
Cheers,
Mick
_______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
