Rank: Member
Groups: Registered
Joined: 28/07/2007(UTC)
Posts: 76
|
Guys,
I have installed a Turbo400 box and used a T bar shifter from a trimatic (lever originaly on the drivers side of T Bar now swapped over to the passengers side to mach the T400), I also pinched the gearbox bracket and linkages. Upon installing these I have noticed that the throw distances are different which points out that I need to lengthen the arm on the T Bar shifter or shorten the arm on the transmission. Would someone be kind enough to give me the distances between holes for both these levers so I can modify as required.
Cheers Trev...
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/08/2006(UTC)
Posts: 1,307
|
Hey trev,
I had the same prob, and made my own arm, with a series of holes drilled in it, so I could adjust it.!
even doing this, i could not get it right? it is so hard.
and i did not even have to change the linkages over to the other side, mine came |
more than basketcase than a bear!
DOH!!! |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/07/2007(UTC)
Posts: 76
|
basketcasebear,
I think you may be right, I might have to chase up ADAM_Perth for a proper T400 T Bar and linkages. I'll wait and see first because if I get the right measurements I can quite easily modify the existing one. If I went cable, a
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/07/2007(UTC)
Posts: 76
|
basketcasebear,
I think you may be right, I might have to chase up ADAM_Perth for a proper T400 T Bar and linkages. Ill wait and see first because if I get the right measurements I can quite easily modify the existing one. If I went cable, an
|
|
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
Hi Ya Guys,
The shifter should be fine as long as the lever is on the passenger side.
You really need to get the proper TH400 linkage on the trans and the long rod connecting them both. Or atleast grab someone elses and copy them to get it right...
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
