Rank: Member
Groups: Registered
Joined: 29/09/2006(UTC)
Posts: 778
|
Les just wondering if you have any plans to reproduce the under dash pannel for hj-hz with A/C. as the AC cars did not have the floor vent switches so they do not need the cut outs. can send a pic if that helps id what im talking about.
cheers
jason |
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by HZute-efi-VS5L
Les just wondering if you have any plans to reproduce the under dash pannel for hj-hz with A/C. as the AC cars did not have the floor vent switches so they do not need the cut outs. can send a pic if that helps id what im talking about.
cheers
jason
Jason We do not have any plans to make this product in the near future, I can put it on the wish list but I would be doubtful it would be produce sometime soon Les
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 29/09/2006(UTC)
Posts: 778
|
no prob les. Trouble is alot of the monaros/upmarket cars had A/C so the need this pannel. as said maybe you could sell the one with the vent sections blanked off and if someone wants one with the slots for the switches they could just trim it out. or i guess that is all new tooling needed?
cheers
jason |
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/03/2009(UTC)
Posts: 1
|
Hi Les,
Any plans to make LX Hatch rear quater panels in the near future?
Cheers,
Daryl
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by Daryl O
Hi Les,
Any plans to make LX Hatch rear quater panels in the near future?
Cheers,
Daryl
Daryl We have no plans to make these in the short term; however you can still buy right hand ones with out the roof section at $935.00 Les
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/01/2008(UTC)
Posts: 101
|
Hi Les,
any progress on the HJ-HZ GTS dash badge?
Cheers.. Quent
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by slobey
Hi Les,
any progress on the HJ-HZ GTS dash badge?
Cheers.. Quent
Hi Quent We are only making the HJ and HX badge at the moment and I would not expect to see a sample until mid May if approved we should have stock late August. Thats the plan I am hoping there would be no problems that would delay them but you never know. Les
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 20/06/2008(UTC)
Posts: 256
|
Hi Les
Any news on whether your going to do the blank steering column shroud for HK-HT-HG and when?
Cheers Stephen
Be careful about reading health books. You may die of a misprint. |
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by 69HT_MUNRO
Hi Les
Any news on whether your going to do the blank steering column shroud for HK-HT-HG and when?
Cheers Stephen
Be careful about reading health books. You may die of a misprint.
Stephen You asked at the right time it was canned on Friday as being not viable ,it maybe looked at again sometime later. Les
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 20/06/2008(UTC)
Posts: 256
|
Bugger. I was hoping you might do them. How come your not going to do them? Cheers Stephen Edited by user Monday, 9 March 2009 6:05:56 AM(UTC)
| Reason: Not specified |
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/01/2009(UTC)
Posts: 119
|
Hi Les,
Might have been asked already but are there plans to make an early HQ GTS console without the cut out in it? Also LX Torana for that matter?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by H81837Q
Hi Les,
Might have been asked already but are there plans to make an early HQ GTS console without the cut out in it? Also LX Torana for that matter?
Hi H81837Q We have plans to make the LX console, possibly the HJ one. We have no plans to make the HQ one as yet but that may change. Les
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/01/2009(UTC)
Posts: 119
|
Would love to see a HQ console Les, Id certainly get one after paying $570 only to be the wrong one for my 71 Q as it has the cut out. Maybe do some market research on demand for the HQ Console? Please Please !!!With the LX console are you looking at making the whole thing? Including the dash air vent section in front of the gear stick? I havent got one for mine but I thought they were a 2 piece console? I may be wrong. When do you expect the LX console production to happen?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by H81837Q
Would love to see a HQ console Les, Id certainly get one after paying $570 only to be the wrong one for my 71 Q as it has the cut out. Maybe do some market research on demand for the HQ Console? Please Please !!!With the LX console are you looking at making the whole thing? Including the dash air vent section in front of the gear stick? I havent got one for mine but I thought they were a 2 piece console? I may be wrong. When do you expect the LX console production to happen?
H81837Q We have done some research on the HQ console and it came up negative (no demand) The LX console is two piece, according to the drawings we borrowed and the top is the same as the HZ only the bottom is different. Unfortunately the drawings where assembly drawings and not manufacturing drawings I am told we cannot make the bottom piece from the drawings and will need a sample which we will obtain in due course. Les
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 20/06/2008(UTC)
Posts: 256
|
quote:
Originally posted by les
quote:
Originally posted by 69HT_MUNRO
Hi Les
Any news on whether your going to do the blank steering column shroud for HK-HT-HG and when?
Cheers Stephen
Be careful about reading health books. You may die of a misprint.
Stephen
You asked at the right time it was canned on Friday as being not viable ,it maybe looked at again sometime later.
Les
Any news if your going to do it in the near future?? Be careful about reading health books. You may die of a misprint. [email protected]http://gallery.oldholden.com/69HT_MUNRO/ |
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by 69HT_MUNRO
quote:
Originally posted by les
quote:
Originally posted by 69HT_MUNRO
Hi Les
Any news on whether your going to do the blank steering column shroud for HK-HT-HG and when?
Cheers Stephen
Be careful about reading health books. You may die of a misprint.
Stephen
You asked at the right time it was canned on Friday as being not viable ,it maybe looked at again sometime later.
Les
Any news if your going to do it in the near future??
Be careful about reading health books. You may die of a misprint.
[email protected]
http://gallery.oldholden.com/69HT_MUNRO/
Stephen That part was canned in early March 2009 I doubt it will come up again this year , there would have to be unprecedented demand to bring it forward and get it made Les
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/12/2005(UTC)
Posts: 36
|
1 Straight HR Van shell. Thanks
There is never enough chrome on a classic !!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by hrpv66
1 Straight HR Van shell. Thanks
There is never enough chrome on a classic !!
Will Monday be ok
|
|
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 22/05/2005(UTC)
Posts: 1,384
|
EJ-EH Ute and Van lower spare wheel doors? Is there news? |
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/02/2005(UTC)
Posts: 607
|
quote:
Originally posted by peter_smol
EJ-EH Ute and Van lower spare wheel doors? Is there news?
They are in stock part number 7418579
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
