Rank: Member
Groups: Registered
Joined: 9/09/2007(UTC)
Posts: 130
|
hi, silly question but...
what does adjusting the screw and locknut on the steering box adjust?
i put an hz box in my q and the steering is alot easier due to the 4 plus turns vs the 5 or so
but there is a (very) little slop in the steering and i'm assuming that the screw will take it out, but not sure. i have just renewed the 4 tie rod ends and the drag link
and do you have a quick and dirty way of adjustment? it just doesn't feel like 1 of those things you can nip up tight and slacken off a tad
once again, thanx in advance, johnny
yes sonny, it's an HQ ute |
yes sonny, it's an HQ ute |
|
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
with mine. i just undone the lock nut and tighten the grub screw then backed it off half a turn. then went for a drive. turn a corner and if it dosent go back to the centre by itself its still alittle tight. just loosen it off quater turn untill you can t
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
