Rank: Member
Groups: Registered
Joined: 8/04/2012(UTC)
Posts: 24
|
Wondering if anyone can help
I have a P5 1974 LTD with a 351 Cleveland there are no markings in the usual spot to determine if i have 2v or 4v heads.
How can i tell what heads i have without pulling the engine apart?
Its the original motor in car, would the id codes be able to give me this info?
any and as much info would be much appreciated
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/03/2008(UTC)
Posts: 101
|
All p5 LTDs have T code motors.
That is, T under engine code on the compliance plate
This is a 351 4V.
BUT the V stands for Venturi, as in 4 barrel carburetor
In your case it would be a motorcraft 4300 605cfm Carbie
No p5 LTD came out with 4v heads from factory.
PS: dont take this as an attack on p5s! I love Landau's and P5 LTDs. Currently have one Landau and owned two others as well.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/04/2012(UTC)
Posts: 24
|
Ok thanks for that much appreciated, so i would definately have 2v heads then?
Do you know why there is no markings?
Do all T code 351 clevelands in P5's have no markings on the heads?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/03/2008(UTC)
Posts: 101
|
Some have 2 in the corner but most are basically bare with no markings.
Will be 2v heads in my opinion.
If you can get the heads off the block you can decode the year month and date of their manucture
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/04/2012(UTC)
Posts: 24
|
Realy dont want to take heads off at this stage,
What would the air cleaner sticker be if they call it a 4v becouse of the four barrell?
Or would it have the 351 2v sticker? On the air cleaner
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/03/2008(UTC)
Posts: 101
|
If it had the chrome lid with black base from factory, it would have no stciker
It it had the blue lid and base from factory it would have the 351 4v sticker.
Where 4v stands for 4 venturi aka 4 barrel
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/04/2012(UTC)
Posts: 24
|
You have been very helpfull much appreciated
Thank you
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 5/06/2005(UTC)
Posts: 1,479
Thanks: 1 times
|
Don't want to muddy the waters but read in AMC that some of the phase 4 motors that were built were thrown into LTDs to get rid of them. They were detuned with a smaller carb. Chances of your motor being one is slim but a few 4V motors did end up in LTDs. I've seen 2 LTDs with the big heads from factory. One was at a Ford wreckers about 20 years ago as the poor old LTD was rusted out and nobody loved them back then. The motor was being sent to NZ. The other was in my mates uncles car. It was a cosmic blue LTD and he'd owned it since new so I knew it had never been tampered with. That car was mint.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/03/2008(UTC)
Posts: 101
|
Phase 4 solid cam 4v motors in LTDs with power steering and air conditioning?
Would love to believe it but I will agree to disagree
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 5/06/2005(UTC)
Posts: 1,479
Thanks: 1 times
|
I've no idea if the motors in the LTDs I saw were solid cam motors. They were both carrying 4V heads on them though. If you read up about what happened when the phase 4 was killed off a lot of the stuff was put into the XA GT RPOs. A lot of other bits and pieces were thrown back into the parts bin to go on any cleveland powered car whether it be a fairlane, LTD etc. There were 200 phase 4 QC motors built. They didn't all go into the RPOs. That's just what I read. I wasn't there so could be 100% wrong.
|
|
|
|
|
|
Rank: Veteran
Groups: Registered
Joined: 26/02/2009(UTC)
Posts: 1,647
Thanks: 16 times
Was thanked: 27 time(s) in 25 post(s)
|
quote:
Originally posted by 74p5ltd
Ok thanks for that much appreciated, so i would definately have 2v heads then?
Do you know why there is no markings?
Do all T code 351 clevelands in P5's have no markings on the heads?
The only markings on the heads is the USA ones, as our aussie heads do not have it cast on. One can tell if it is a aussie 302 or 351 just by looking at the front of the head to the gasket. The USA motors sent to aus only have 351 with 4 or 4 with a dot casting or 2 or a 2 with a dot, the dot is a square block casting type. and then the USA get nothing or a M cast on the head from 1975 on. my dads aussie 1971 Galaxie 400 cleveland had nothing cast on the heads, it was DIF cast not cleveland. I would think a 4V head with a 2V cam would not perform any better at all, as the XY-A GT 4V has a bit bigger cam then the std 2V. and XA GT auto's got 2V 351 motors about June 1972, so why would a P5 get 4V heads. I am sure the so called Phase 4 motors would of sold to Moffat etc and you could pick them up at the ford dealer. and remember all the GT-HO Motors were just GT motors that Ford AUS disassembled hear and put the big cam in etc.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/04/2012(UTC)
Posts: 24
|
Well ive heard the same thing from many people, in 74 left over gt motor parts were put into these cars, cant rule it out entirely, going to contact ford see if they have any info on my car, my car has been in family since new original motor.
|
|
|
|
|
|
Rank: Member
Groups: Moderator, Registered
Joined: 22/04/2010(UTC)
Posts: 473
|
why would 2 year old motors be put into a74 model. from what I heard the motors went built to ho spec at the time, only a few parts like exhausts etc had been bulk made by the time they died off
iv also seen pics online of 4 marked heads with 2v ports
|
|
|
|
|
|
Rank: Veteran
Groups: Registered
Joined: 26/02/2009(UTC)
Posts: 1,647
Thanks: 16 times
Was thanked: 27 time(s) in 25 post(s)
|
quote:
Originally posted by BIGCAV
why would 2 year old motors be put into a74 model. from what I heard the motors went built to ho spec at the time, only a few parts like exhausts etc had been bulk made by the time they died off
iv also seen pics online of 4 marked heads with 2v ports
The 4 you are on about is only on the top edge ? not the other 4 or 3 etc that are down lower and round abouts.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/04/2012(UTC)
Posts: 24
|
Have removed air con compressor and discovered a 3 in the head
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
