Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
Ht engine bay info
Options Go to last post Go to first unread
Previous Topic Next Topic
Devo Offline
#1 Posted : Thursday, 12 May 2016 9:14:18 AM(UTC)
Devo

Rank: Member

Reputation:

Groups: Registered
Joined: 5/12/2014(UTC)
Posts: 124

Thanks: 1 times
Hi all
Continuing the restoration of my car and i want to bring the engine bay back to original by filling the incorrect holes. Does anyone have good photos of a 69 HT 308/2 speed engine bay primarily inner subframe sides and firewall ?

Thanks
Back to top
kevrev Offline
#2 Posted : Monday, 16 May 2016 12:52:06 PM(UTC)
kevrev

Rank: Member

Reputation:

Groups: Registered
Joined: 5/04/2013(UTC)
Posts: 39

Thanks: 2 times
Was thanked: 5 time(s) in 5 post(s)
Hi Devo here is a photo I've been using as a reference while restoring my car.
Not sure if the photo is 69 or 70, one of the gurus here on the forum might know.
Cheers Kev
Back to top
Devo Offline
#3 Posted : Saturday, 21 May 2016 6:09:47 PM(UTC)
Devo

Rank: Member

Reputation:

Groups: Registered
Joined: 5/12/2014(UTC)
Posts: 124

Thanks: 1 times
Thanks mate that helps a bit. I have too many holes in my inner tubs. I know I need 2 for the drivers side ( washer and headlight loom) but unsure of others.
Back to top
Ausjacko Offline
#4 Posted : Saturday, 21 May 2016 6:53:12 PM(UTC)
Ausjacko

Rank: Member

Reputation:

Groups: Registered
Joined: 30/05/2015(UTC)
Posts: 167

Thanks: 50 times
Was thanked: 6 time(s) in 6 post(s)
I have a shot of the engine bay firewall with the holes described if you would like it.

Here goes:

1. Clutch master cylinder
2. Handbrake handle
3. Handbrake cable + rubber boot
4. Wiper motor
5. Speedo cable
6. Red cable from alternator to ammeter
7. Engine wiring plug
8. Accelerator linkage mount
9. Blanked by a 1/4 -20 phillips head screw. Used for 6 cylinder throttle linkage pivot. Refer page 114 of the HT parts catalogue
10. Blanked by a 1/4 -20 phillips head screw. Used for 6 cylinder throttle linkage pivot. Refer page 114 of the HT parts catalogue
11. Heater control cable
12. Interior dash blanket plug
13. Holes above brake booster other end of accelerator linkage
14. ?
15. ?
16. ?
17. ?
18. ?
19. ?
20. ?
21. ?





Happy for others to fill in the blanks.
Cheers
Jacko

Edited by user Saturday, 21 May 2016 8:15:34 PM(UTC)  | Reason: Not specified
Back to top
HGV8 Offline
#5 Posted : Sunday, 22 May 2016 7:31:00 PM(UTC)
HGV8

Rank: Member

Reputation:

Groups: Registered
Joined: 28/04/2012(UTC)
Posts: 420

Thanks: 3 times
Was thanked: 10 time(s) in 9 post(s)
Originally Posted by: kevrev Go to Quoted Post
Hi Devo here is a photo I've been using as a reference while restoring my car.
Not sure if the photo is 69 or 70, one of the gurus here on the forum might know.
Cheers Kev



Nice reference photo but is that a HK style heater tap?

Maybe a Holden mockup photo prior to HT 308 release. Noticed it doesn't have master cylinder fitted as yet..

I have a heap of 308 HTG reference photo's if needed.. From cars in recent years, though some are not exactly correct.

Jim
j.williams
Back to top
Devo Offline
#6 Posted : Monday, 23 May 2016 5:44:36 PM(UTC)
Devo

Rank: Member

Reputation:

Groups: Registered
Joined: 5/12/2014(UTC)
Posts: 124

Thanks: 1 times
Good info here . Definately keen to see a few engine bay photos if you can post them

Cheers
Back to top
Ausjacko Offline
#7 Posted : Monday, 23 May 2016 5:52:35 PM(UTC)
Ausjacko

Rank: Member

Reputation:

Groups: Registered
Joined: 30/05/2015(UTC)
Posts: 167

Thanks: 50 times
Was thanked: 6 time(s) in 6 post(s)
OK, have fixed the photo to add 22 as the hole above the brake booster. 13 is as depicted and unidentified
Cheers
Ian
Back to top
HGV8 Offline
#8 Posted : Monday, 23 May 2016 6:48:33 PM(UTC)
HGV8

Rank: Member

Reputation:

Groups: Registered
Joined: 28/04/2012(UTC)
Posts: 420

Thanks: 3 times
Was thanked: 10 time(s) in 9 post(s)
A few Holden V8 engine bays..

j.williams
Back to top
kevrev Offline
#9 Posted : Tuesday, 24 May 2016 2:26:47 PM(UTC)
kevrev

Rank: Member

Reputation:

Groups: Registered
Joined: 5/04/2013(UTC)
Posts: 39

Thanks: 2 times
Was thanked: 5 time(s) in 5 post(s)
RHS Skirt and rail

Here's a shot of a NOS HG inner skirt and rail, the only difference with a HT should be an extra hole for the brake fail switch near the brake booster for HG only.
Also the HT has an extra small hole under the washer bottle for a supporting clip.
Cheers Kev
Back to top
Devo Offline
#10 Posted : Tuesday, 24 May 2016 4:28:43 PM(UTC)
Devo

Rank: Member

Reputation:

Groups: Registered
Joined: 5/12/2014(UTC)
Posts: 124

Thanks: 1 times
OK that helps thanks. Looks like 3 holes visible . 2 for the washer tube and 1 down low for fuel line clip.

Plus the washer clip you mention looks like it for the drivers side

Any clear photos out there for the passenger side ???
Back to top
kevrev Offline
#11 Posted : Tuesday, 24 May 2016 6:53:51 PM(UTC)
kevrev

Rank: Member

Reputation:

Groups: Registered
Joined: 5/04/2013(UTC)
Posts: 39

Thanks: 2 times
Was thanked: 5 time(s) in 5 post(s)
There's a NOS LHS inner skirt on eBay at the moment, the pictures on the ad might help

http://www.ebay.com.au/i...-HK-HT-HG-/172107164663
Back to top
gm5735 Offline
#12 Posted : Tuesday, 24 May 2016 9:58:46 PM(UTC)
gm5735

Rank: Member

Reputation:

Groups: Registered
Joined: 16/04/2014(UTC)
Posts: 768
Man
Location: Victoria

Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
The two pictures below may help.





These are for a Dandenong HT.
Back to top
HK1837 Offline
#13 Posted : Wednesday, 25 May 2016 8:35:00 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Originally Posted by: Ausjacko Go to Quoted Post
I have a shot of the engine bay firewall with the holes described if you would like it.

Here goes:

1. Clutch master cylinder
2. Handbrake handle
3. Handbrake cable + rubber boot
4. Wiper motor
5. Speedo cable
6. Red cable from alternator to ammeter
7. Engine wiring plug
8. Accelerator linkage mount
9. Blanked by a 1/4 -20 phillips head screw. Used for 6 cylinder throttle linkage pivot. Refer page 114 of the HT parts catalogue
10. Blanked by a 1/4 -20 phillips head screw. Used for 6 cylinder throttle linkage pivot. Refer page 114 of the HT parts catalogue
11. Heater control cable
12. Interior dash blanket plug
13. Holes above brake booster other end of accelerator linkage
14. ?
15. ?
16. ?
17. ?
18. ?
19. ?
20. ?
21. ?





Happy for others to fill in the blanks.
Cheers
Jacko


Number 3 (if it is the one in the column support) is for mechanical clutch rod (in HT means all manuals other than Saginaw) or rubber boot if hole present and no mechanical clutch mech.

Number 5 is only speedo cable for M21, M22 transmissions or for V8 M35. It is not there for M15, M20, M40 or 6cyl M35 transmissions.

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
 1 user thanked HK1837 for this useful post.
Ausjacko on 1/01/2017(UTC)
Ausjacko Offline
#14 Posted : Wednesday, 25 May 2016 7:50:27 PM(UTC)
Ausjacko

Rank: Member

Reputation:

Groups: Registered
Joined: 30/05/2015(UTC)
Posts: 167

Thanks: 50 times
Was thanked: 6 time(s) in 6 post(s)
nice, mine is a v8 Saginaw, hence the rubber boot and speedo references. I will update my list.
Back to top
Devo Offline
#15 Posted : Thursday, 26 May 2016 4:35:24 PM(UTC)
Devo

Rank: Member

Reputation:

Groups: Registered
Joined: 5/12/2014(UTC)
Posts: 124

Thanks: 1 times
This is gold guys. Think I'm sorted now

Thanks all.
Back to top
Ausjacko Offline
#16 Posted : Sunday, 1 January 2017 10:08:46 AM(UTC)
Ausjacko

Rank: Member

Reputation:

Groups: Registered
Joined: 30/05/2015(UTC)
Posts: 167

Thanks: 50 times
Was thanked: 6 time(s) in 6 post(s)
Bump
Any further views on the firewall holes?

I added a 23 to reflect the correct handbrake cable location down and to the left of 20.
19 is a PO fuel canister add-on.
Back to top
Devo Offline
#17 Posted : Sunday, 8 April 2018 7:08:54 PM(UTC)
Devo

Rank: Member

Reputation:

Groups: Registered
Joined: 5/12/2014(UTC)
Posts: 124

Thanks: 1 times
Hey guys.
I come back to this post to check the engine bay holes etc and being photobucket there all gone......

Can anyone repost the photos that show the factory holes/feedthroughs etc ?

Cheers
Back to top
HKM068 Offline
#18 Posted : Thursday, 12 April 2018 12:45:15 PM(UTC)
HKM068

Rank: Member

Reputation:

Groups: Registered
Joined: 8/12/2012(UTC)
Posts: 48
Devo

If you use Google Chrome, there is a fix for the photo issue. Here is link for the add in: https://chrome.google.co...tegory/extensions?hl=en

If not, I have a copy of these photos and can send them to you if you like.

HKM
Back to top
Devo Offline
#19 Posted : Saturday, 14 April 2018 9:57:14 PM(UTC)
Devo

Rank: Member

Reputation:

Groups: Registered
Joined: 5/12/2014(UTC)
Posts: 124

Thanks: 1 times
Thanks for that. Ill do it on my desktop when back at work.

Cheers
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.112 seconds.