Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
G`day all. What is the max size a 179 hp block can be taken out to? Mine already measures approx 91 mm (measured roughly with verniers)
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,898
Thanks: 1 times
Was thanked: 556 time(s) in 531 post(s)
|
I've seen them at 192 cubes ie 1/8" oversize. But why bother? Just use a 186 block. That size overbore is a shaky deal.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 22/05/2005(UTC)
Posts: 1,384
|
They have been bored out to 186 +.060" oversize, which is 192, which is .125" oversize for a 179, which is a very large amount to overbore. The walls would be close to 1.6mm thinner |
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,114
Thanks: 1 times
Was thanked: 219 time(s) in 199 post(s)
|
Hi Guys.
In my experience, both the 179 & 186 blocks can be safely bored to the same max of 186 + .060" = 192 ci. The 179 starts life with a thicker wall, but they are both essentially the same casting. I have seen some bored .080", but the castings wo |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 25/11/2006(UTC)
Posts: 62
|
can i still use the steel crank from the 179 block in a 186 block? if so what differences will this make+...Cheers..
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,114
Thanks: 1 times
Was thanked: 219 time(s) in 199 post(s)
|
Hi briane.
Most HR 186 motors also feature forged cranks. We've done this one to death, do a search & check out the past posts.
Dr Terry. |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
