Rank: Member
Groups: Registered
Joined: 4/07/2005(UTC) Posts: 71
|
Hey Guys I have just upgraded the brakes on my Xb Falcon to Xd Discs.Ive changed over the mastercylinder, booster and all lines.Im having trouble getting the air out of them.Ive followed the manual on how to bleed them but nothing seems to be happening, the resevoir is still remaining full. Any advice would be muchly appreciated.
Cheers Jack
This is Ford Country
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 5/06/2005(UTC) Posts: 1,479
Thanks: 1 times
|
Have you loosened the bleeder screw on the calipers? Are you using a bleeding tool?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/07/2005(UTC) Posts: 71
|
Yep push down on brake pedal, Loosen screw, Tighten screw, Release brake pedal.
This is Ford Country
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC) Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
Try using a piece of vacuum hose about 300mm long,open bleeder connect hose to bleeder and drop other end into a bottle or similar, then pump until fluid comes out keeping master cyl full this always works.
if it ain't broke we can improve it.
Ch
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/07/2005(UTC) Posts: 71
|
I finally found the problem, After pulling apart the lines there were a couple of blockages. I cleaned them out and now its all working fine.
Thanks for the help! Cheers Jack
This is Ford Country
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.