Rank: Member
Groups: Registered
Joined: 28/07/2007(UTC)
Posts: 76
|
Guys,
Can someone shed some light on the use of hub centering rings as I have a set of Cragar SS rims that are multi fit. I have noticed that with the car on stands and in gear, the rims are almost impossible to center. Should I be looking at getting some centering rings for these rims and if so, can someone suggest an online store that will be able to supply them. Am I looking in the right area as I havent had much to do with these centering rings before.
Cheers in advance Trev...
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/07/2007(UTC)
Posts: 76
|
Just to add,
I have noticed there is heaps of them on ebay. Would anyone know the hub diameter of the axles on a 10 bolt salisbury (drum) and the front hub diameter as this will make up the ID requirements for the spacers. I will have to measure th
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/01/2007(UTC)
Posts: 282
|
From what i can measure with the studs in the way...70.50 - 71.45mm front or rear.
cheers...mario
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/11/2005(UTC)
Posts: 268
|
Trev, i have a set on my HK GTS although i have HQ front stud pattern and ford rear stud pattern (9inch). However these dont fit my HT GTS which has the original 10bolt and front hubs.
|
|
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
isn't the multi fits ones illegal in Australia we bought a set of 17 x 7 ones recently that have the round hole like all the other rims. http://i109.photobucket....Toyota%20Crown/612-1.gif
|
|
|
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
isnt the multi fits ones illegal in Australia we bought a set of 17 x 7 ones recently that have the round hole like all the other rims. http://i109.photobucket....Toyota%20Crown/612-1.gif
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/07/2007(UTC)
Posts: 76
|
I measured the rims and the rear axle and came up with ID rim ~91.00mm, OD Axle ~ 71.00mm so looks like the centering rings will be around the 20mm mark. Now all I have to do is find someone who has a set or get some made. Anyone able to help.
Thanks Tre
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
