Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
28 Pages«<1718192021>»
THE EH
Options Go to last post Go to first unread
Previous Topic Next Topic
commodorenut Offline
#361 Posted : Wednesday, 30 November 2016 6:43:52 PM(UTC)
commodorenut

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135

Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
Getting so close now. Bet you can't wait to drive it up the street.
Cheers,

Mick
_______________________________________________________________

Judge a successful man not on how he treats his peers, but on how he treats those less fortunate.
Back to top
the eh Offline
#362 Posted : Wednesday, 30 November 2016 7:17:48 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: commodorenut Go to Quoted Post
Getting so close now. Bet you can't wait to drive it up the street.


Hopefully this weekend. Brakes to bleed, radiator to refit, bottom hose to make and that's enough to get it moving and stopping.
Back to top
the eh Offline
#363 Posted : Monday, 12 December 2016 3:10:18 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Steering shaft removed and machined down to suit the Torana uni joint. what was I thinking using American rubbish when a good old Aussie Holden part is better. Lesson learnt. All done, trial fitted and painted. Reassembly after lunch and hopefully job done.
Back to top
the eh Offline
#364 Posted : Monday, 12 December 2016 3:13:36 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Finally got a start on the dash fascia. It took longer to set this up in the mill than cut the 6 rough holes. Now the hours of machining begin. This may take a while...




Basic Gauge holes done. Not bad considering I can only take 0.25mm of material off each time. There's about 4 hours there just taking these from the holesaw cut size to finished size. Still need to machine the slot for the LED light panel.. Then I'll take it out and set it up again for final machining..

Edited by user Monday, 12 December 2016 3:15:02 PM(UTC)  | Reason: Not specified
Back to top
the eh Offline
#365 Posted : Sunday, 18 December 2016 6:14:10 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
What a dashing day I had!!











Machined up a collar to help blend the steering wheel boss into the column. Looks simple but took hours and hours..
Back to top
the eh Offline
#366 Posted : Friday, 30 December 2016 6:39:51 AM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Made up some subframe bolt covers which will be painted black. I also cut out a notch in the dash frame to let the speedo cable make it's way into the speedo. Finally I got the A/C unit fitted up under the dash and the ducting in place.
Back to top
commodorenut Offline
#367 Posted : Friday, 30 December 2016 7:02:10 AM(UTC)
commodorenut

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135

Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
Do you have a roll of that felt tape for wrapping wiring looms up? Stops them squeaking against painted areas (like they do when wrapped in nitto tape).
Reason I ask, is it may be wise to wrap a few layers around the speedo cable, to prevent a potential annoying rattle later on.
Cheers,

Mick
_______________________________________________________________

Judge a successful man not on how he treats his peers, but on how he treats those less fortunate.
Back to top
the eh Offline
#368 Posted : Friday, 30 December 2016 3:03:55 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
A/c unit came out and went back in 3 or 4 times today until I got everything sorted. I needed to tweak the heater hose connectors and one of the A/C hose fittings. I also needed to fit the vacuum line to the heater tap as I forgot to do this. Getting the rubber heater hoses from the engine was a nightmare. Heaps of white grease, heaps of swearing and then with some help from the lovely wife we got the hoses fitted and the firewall grommet in place. I needed to relocate the ignition coil also as it was in the road.
Back to top
the eh Offline
#369 Posted : Friday, 30 December 2016 3:05:18 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: commodorenut Go to Quoted Post
Do you have a roll of that felt tape for wrapping wiring looms up? Stops them squeaking against painted areas (like they do when wrapped in nitto tape).
Reason I ask, is it may be wise to wrap a few layers around the speedo cable, to prevent a potential annoying rattle later on.


I will do this as I have heaps of the cloth tape available. Anything to keep things quiet and cosy..
Back to top
the eh Offline
#370 Posted : Monday, 2 January 2017 5:18:04 AM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
A/c unit came out and went back in 3 or 4 times today until I got everything sorted. I needed to tweak the heater hose connectors and one of the A/C hose fittings. I also needed to fit the vacuum line to the heater tap as I forgot to do this. Getting the rubber heater hoses from the engine was a nightmare. Heaps of white grease, heaps of swearing and then with some help from the lovely wife we got the hoses fitted and the firewall grommet in place. I needed to relocate the ignition coil also as it was in the road.
Back to top
the eh Offline
#371 Posted : Monday, 2 January 2017 5:20:18 AM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Tailgate straps sorted for now. Still need to make some retaining bolts for the body end of the straps.
Back to top
the eh Offline
#372 Posted : Monday, 2 January 2017 5:22:45 AM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
What a surprise. A bloody water leak. I refilled the radiator, found my bitumen tape and was laying on my back in the ute ready to start wrapping the heater and A/C pipe fittings when I see a drip. Followed by another drip. Firstly I thought it was just a loose hose clamp. No. One of the many solder joints on my dodgy home made pipes was leaking. I pulled it out resoldered it and put it back in. Still leaked. REPEAT. Hopefully no leak now. I also painted the subframe bolt covers. I managed to find some large diameter flat washers to use on the subframe bolts. These are the same diameter as the top bush so are perfect. They were originally only 3/8" id so I put them in the lathe and ran them out to 1/2" id. A bit of black paint to stop them rusting and they're done. I also played around with an old steering wheel button. Colour matched it to the interior colours. Looks good. I need to find a good one now to do the same and fit it to the SAAS wheel.
Back to top
the eh Offline
#373 Posted : Monday, 2 January 2017 8:18:46 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Dash fascia is going to take too much time for me to machine to what I want so it's getting a polish and then brushed finish. I also checked the speedo cable fitment. Looks like I got that right. Also fitted a USB power socket so she can keep her phone charged. The headunit we have has bluetooth handsfree phone capability so this completes the package. Batteries also sorted. One can be isolated to ensure we don't get caught somewhere with a flat battery.
Back to top
the eh Offline
#374 Posted : Tuesday, 3 January 2017 4:25:19 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Front sheetmetal back on after some stone chip protector was added to the back. Too many little bolts and nuts for me so I called for reinforcements.
Back to top
the eh Offline
#375 Posted : Wednesday, 4 January 2017 3:54:18 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Drivers side lighting all buttoned up. Passenger side harness run across the car and terminated ready to go. I need to find one lousy grommet to get it finalised. Another box ticked
Back to top
commodorenut Offline
#376 Posted : Wednesday, 4 January 2017 6:26:13 PM(UTC)
commodorenut

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC)
Posts: 3,135

Thanks: 1 times
Was thanked: 35 time(s) in 33 post(s)
Making good use of the holidays (and the idle help too!)
Cheers,

Mick
_______________________________________________________________

Judge a successful man not on how he treats his peers, but on how he treats those less fortunate.
Back to top
the eh Offline
#377 Posted : Wednesday, 4 January 2017 7:40:05 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: commodorenut Go to Quoted Post
Making good use of the holidays (and the idle help too!)


Sure am. Another 7 days of holidays s hopefully I can get it close to finished..
Back to top
the eh Offline
#378 Posted : Friday, 6 January 2017 6:26:39 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Todays effort, Dynamat in the doors, find all the door hardware and get the best ones cleaned up and ready to fit. Longer subframe bolts fitted and blanking covers siliconed in place. All my helpers were on board today..
Back to top
the eh Offline
#379 Posted : Friday, 6 January 2017 6:45:44 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Drivers door hardware fitted and aligned. Opens and closes perfectly. Inner door belt weatherstrip fitted. HOWEVER the outer didn't make it through the process. It's now in the bin. Not even close to matching the shape of the door and about 10mm too short. Surely someone can make them to fit correctly.
Back to top
the eh Offline
#380 Posted : Sunday, 8 January 2017 6:16:18 AM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Great progress today, Glovebox and main wiring housing refitted and the wiring nicely tucked up behind the glovebox. Glovebox lid refitted and aligned. Grille bar supports masked and painted. Door cards made from ply. Rear tray area started and some cleaning up under way..
Back to top
Users browsing this topic
Guest (4)
28 Pages«<1718192021>»
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.123 seconds.