Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
Electric choke on Rochester quadrajet - VB 5 litre Commodore, where to wire it in?
Options Go to last post Go to first unread
Previous Topic Next Topic
SLENUT Offline
#1 Posted : Tuesday, 6 October 2020 6:00:25 PM(UTC)
SLENUT

Rank: Member

Reputation:

Groups: Registered
Joined: 5/03/2005(UTC)
Posts: 120

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Hello all

Years ago i got a rebuilt Rochester from Hume perfomance, the right one for a VB 5 litre manual.
I also decided to get an electric choke for it. However i put the wire to the wiper motor and has made the wiper motor very slow.

Where should i have this wire on? I believe i need 12V to make it work properly?
The Commodore SL/E fanatic.
Back to top
Smitty2 Offline
#2 Posted : Tuesday, 6 October 2020 9:50:44 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: SLENUT Go to Quoted Post
Hello all

Years ago i got a rebuilt Rochester from Hume perfomance, the right one for a VB 5 litre manual.
I also decided to get an electric choke for it. However i put the wire to the wiper motor and has made the wiper motor very slow.

Where should i have this wire on? I believe i need 12V to make it work properly?


Damo.. you need to a find a 12v 'ignition' on wire anywhere in the engine bay.

do NOT use the coil lead as some do.. as it is a resistor type power feed on VBs
(which come with points ignition) but any 12v feed that comes live when you
turn the ignition on


ps.. the wiper motor is not a good idea as the choke pulls a few amps &
don't fuse the choke with a 1A fuse either. Needs 10 amps

here is mine on the race car (right click and view pic for a closer shot)
.. VKs have a nice handy fusebox close by Whistle

Edited by user Tuesday, 6 October 2020 9:52:46 PM(UTC)  | Reason: Not specified

Club circuit racing...the best fun you can have with your pants on
Back to top
SLENUT Offline
#3 Posted : Wednesday, 7 October 2020 9:26:59 AM(UTC)
SLENUT

Rank: Member

Reputation:

Groups: Registered
Joined: 5/03/2005(UTC)
Posts: 120

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Thought they maybe the case, hmmm. I'll have a looksy and find a place for it. I've read about the pink wire can be used.
The Commodore SL/E fanatic.
Back to top
Smitty2 Offline
#4 Posted : Wednesday, 7 October 2020 1:45:55 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: SLENUT Go to Quoted Post
Thought they maybe the case, hmmm. I'll have a looksy and find a place for it. I've read about the pink wire can be used.


pink wire is your power feed to the coil. I wouldn't use it
on a VB it is a resistor wire.. won't run your ignition AND the coil

Have you got a Quaddy with the idle nudger/anti-dieseling motor on the side of it on the 308?
(standard factory fitment ...) From memory , that has a full 12v feed that runs when
the ignition is on. That is.. when you start and run the engine, that idle nudger is always
powered. You have a tester or multimeter you can check the volts on that circuit?



Club circuit racing...the best fun you can have with your pants on
Back to top
SLENUT Offline
#5 Posted : Wednesday, 7 October 2020 3:09:27 PM(UTC)
SLENUT

Rank: Member

Reputation:

Groups: Registered
Joined: 5/03/2005(UTC)
Posts: 120

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
No i don't have the anti dieseling solenoid.
The Commodore SL/E fanatic.
Back to top
Dr Terry Offline
#6 Posted : Wednesday, 7 October 2020 3:37:42 PM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058

Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
Originally Posted by: SLENUT Go to Quoted Post
No i don't have the anti dieseling solenoid.


All VBs had an idle stop solenoid as standard. Why anybody would remove it is beyond me.

Having said that. Even if the solenoid is no more, its wiring harness might still be there. It would be a good supply for the choke.

Dr Terry
If at first you don't succeed, just call it Version 1.0
Back to top
 1 user thanked Dr Terry for this useful post.
Smitty2 on 7/10/2020(UTC)
Smitty2 Offline
#7 Posted : Wednesday, 7 October 2020 5:14:15 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: Dr Terry Go to Quoted Post
Originally Posted by: SLENUT Go to Quoted Post
No i don't have the anti dieseling solenoid.


All VBs had an idle stop solenoid as standard. Why anybody would remove it is beyond me.

Having said that. Even if the solenoid is no more, its wiring harness might still be there. It would be a good supply for the choke.

Dr Terry


yes... good pickup on that

Club circuit racing...the best fun you can have with your pants on
Back to top
Premier 350 Offline
#8 Posted : Wednesday, 7 October 2020 7:52:32 PM(UTC)
Premier 350

Rank: Member

Reputation:

Groups: Registered
Joined: 2/02/2009(UTC)
Posts: 564
Man
Australia
Location: On a build over WWII airfield. Got the .50 cal cases from my driveway to prove it

Thanks: 31 times
Was thanked: 8 time(s) in 8 post(s)
Slightly off topic, but I had an electric choke Holley on my HQ. Since I was running a HEI ignition, I used a relay to give 12V to the HEI and also power the choke. The original resistance ignition wire was shortened and triggered the relay. Never a problem in 10 years and 4000 miles. In your case you could use the 12V from the wiper to trigger the relay and run separate wiring for the high amperage draw of the choke.
Attn camry drivers. The accelerator is the skinny pedal on the right.
Back to top
SLENUT Offline
#9 Posted : Wednesday, 7 October 2020 8:34:40 PM(UTC)
SLENUT

Rank: Member

Reputation:

Groups: Registered
Joined: 5/03/2005(UTC)
Posts: 120

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Reason it doesn't have anti dieseling solenoid cause sometime in its life its been bastardised to buggery. Had a Holley and torker manifold and all pollution gear removed when i got it 20 years ago.
The Commodore SL/E fanatic.
Back to top
wbute Offline
#10 Posted : Friday, 9 October 2020 12:34:11 PM(UTC)
wbute

Rank: Veteran

Reputation:

Groups: Registered
Joined: 25/01/2010(UTC)
Posts: 1,124

Thanks: 1 times
Was thanked: 18 time(s) in 17 post(s)
Originally Posted by: Premier 350 Go to Quoted Post
Slightly off topic, but I had an electric choke Holley on my HQ. Since I was running a HEI ignition, I used a relay to give 12V to the HEI and also power the choke. The original resistance ignition wire was shortened and triggered the relay. Never a problem in 10 years and 4000 miles. In your case you could use the 12V from the wiper to trigger the relay and run separate wiring for the high amperage draw of the choke.


Why use a relay? Why not just take 12v straight from any 12v that’s convenient?
Back to top
Dr Terry Offline
#11 Posted : Friday, 9 October 2020 1:17:05 PM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058

Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
Originally Posted by: wbute Go to Quoted Post
Originally Posted by: Premier 350 Go to Quoted Post
Slightly off topic, but I had an electric choke Holley on my HQ. Since I was running a HEI ignition, I used a relay to give 12V to the HEI and also power the choke. The original resistance ignition wire was shortened and triggered the relay. Never a problem in 10 years and 4000 miles. In your case you could use the 12V from the wiper to trigger the relay and run separate wiring for the high amperage draw of the choke.


Why use a relay? Why not just take 12v straight from any 12v that’s convenient?


Because of the current draw. The total current of the HEI plus the electric choke element is going to be in the region of 20-25 amps continuous. This is a bit more than the old 70s wiring & ignition switch is going to be happy with.

By running a relay you will improve performance (less voltage loss) & improve reliability.

Dr Terry

Edited by user Friday, 9 October 2020 1:21:52 PM(UTC)  | Reason: Not specified

If at first you don't succeed, just call it Version 1.0
Back to top
 1 user thanked Dr Terry for this useful post.
Smitty2 on 9/10/2020(UTC)
wbute Offline
#12 Posted : Saturday, 10 October 2020 7:49:20 AM(UTC)
wbute

Rank: Veteran

Reputation:

Groups: Registered
Joined: 25/01/2010(UTC)
Posts: 1,124

Thanks: 1 times
Was thanked: 18 time(s) in 17 post(s)
Of course. Sorry I was just off night shift. Brain doesn’t work too well then.
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.057 seconds.