Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

holden05 Offline
#1 Posted : Sunday, 17 October 2021 12:17:55 PM(UTC)
holden05

Rank: Member

Reputation:

Groups: Registered
Joined: 23/04/2011(UTC)
Posts: 125

Thanks: 1 times
Just bleeding the brakes on the wb ute
Ive got no fluid coming from pass rear so Ive tried the drivers side front and none from there either. Any ideas Whats going on?
HK1837 Offline
#2 Posted : Sunday, 17 October 2021 1:34:05 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
Did you blow the lines out with compressed air to make sure they were free? If its all back together now I'd undo the rear wheel cylinder pipes and put a bit of plastic or rubber tube on them directing into a contained on the ground. Undo at the master cylinder and blow some air down them to make sure the pipes aren't blocked up.

Try the same with the calipers but where the hose joins to the solid pipe. You might need some pipe ring spanners to undo the nuts.

Just try a bit of light air pressure on the fronts so you don't blow fluid everywhere, put a rag over the end of the pipe to catch anything and wipe it off any paint if it gets on it.

If it isn't blocked lines then not sure what is going on. Did you rebuild the calipers?
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
HK-Q-Z5.0Lfan Offline
#3 Posted : Sunday, 17 October 2021 2:26:13 PM(UTC)
HK-Q-Z5.0Lfan

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2018(UTC)
Posts: 100
Man
Australia

Thanks: 4 times
Was thanked: 4 time(s) in 4 post(s)
I recently had same happen, & it was the flexible hose above the diff. Looked OK, but had collapsed on inside & was blocked
Smitty2 Offline
#4 Posted : Sunday, 17 October 2021 2:55:08 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 347
Australia
Location: bayside Melbourne

Thanks: 216 times
Was thanked: 26 time(s) in 26 post(s)
Originally Posted by: HK-Q-Z5.0Lfan Go to Quoted Post
I recently had same happen, & it was the flexible hose above the diff. Looked OK, but had collapsed on inside & was blocked


poster is also saying drivers side front. ... nothing
so not the diff hose

I suspect the proportioning valve

Club circuit racing...the best fun you can have with your pants on
HK-Q-Z5.0Lfan Offline
#5 Posted : Sunday, 17 October 2021 3:40:30 PM(UTC)
HK-Q-Z5.0Lfan

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2018(UTC)
Posts: 100
Man
Australia

Thanks: 4 times
Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Smitty2 Go to Quoted Post
Originally Posted by: HK-Q-Z5.0Lfan Go to Quoted Post
I recently had same happen, & it was the flexible hose above the diff. Looked OK, but had collapsed on inside & was blocked


poster is also saying drivers side front. ... nothing
so not the diff hose



Sorry, miss-read post.

Yes, could be proportion valve
HK1837 Offline
#6 Posted : Sunday, 17 October 2021 3:59:30 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
I think he was getting a rebuilt WB master cylinder so may not be the valve.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
holden05 Offline
#7 Posted : Sunday, 17 October 2021 7:00:32 PM(UTC)
holden05

Rank: Member

Reputation:

Groups: Registered
Joined: 23/04/2011(UTC)
Posts: 125

Thanks: 1 times
Yes. Ive ordered a new one but just wanted to bleed out old fluid while I wait. Just surprises me nothin comes out of 2
Only 2 things I can think of
I left the master cyl cap on
Would the stuffed master have anything to do with it not bleeding?

Edited by user Sunday, 17 October 2021 7:40:47 PM(UTC)  | Reason: Not specified

Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.067 seconds.