Rank: Member
Groups: Registered
Joined: 15/09/2022(UTC) Posts: 84 ![Australia]( "Australia") Location: Perth Thanks: 37 times
|
HI all
Any trick to replacing both the PS lines ? (253)
Does the pump need to be primed or anything or just fill & go
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058
Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
|
Originally Posted by: Taztiger4  HI all
Any trick to replacing both the PS lines ? (253)
Does the pump need to be primed or anything or just fill & go No tricks, just make sure you have the correct hoses. The HJ uses the early high pressure hose with a flare type fitting at each end. Fill it up, put the cap on & start the engine, let it idle & turn the steering wheel slowly from lock to lock. Turn it off to top it up. Initially the fluid will tend to aerate (fizz up) a bit & the pump will whine, but don't worry, just let it sit & start it up later. Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 15/09/2022(UTC) Posts: 84 ![Australia]( "Australia") Location: Perth Thanks: 37 times
|
Originally Posted by: Dr Terry Originally Posted by: Taztiger4 HI all
Any trick to replacing both the PS lines ? (253)
Does the pump need to be primed or anything or just fill & go No tricks, just make sure you have the correct hoses. The HJ uses the early high pressure hose with a flare type fitting at each end. Fill it up, put the cap on & start the engine, let it idle & turn the steering wheel slowly from lock to lock. Turn it off to top it up. Initially the fluid will tend to aerate (fizz up) a bit & the pump will whine, but don't worry, just let it sit & start it up later. Dr Terry cheers, is there a drain port ? or just crack the hoses, let it bleed & into it
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058
Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
|
Originally Posted by: Taztiger4 Originally Posted by: Dr Terry Originally Posted by: Taztiger4 HI all
Any trick to replacing both the PS lines ? (253)
Does the pump need to be primed or anything or just fill & go No tricks, just make sure you have the correct hoses. The HJ uses the early high pressure hose with a flare type fitting at each end. Fill it up, put the cap on & start the engine, let it idle & turn the steering wheel slowly from lock to lock. Turn it off to top it up. Initially the fluid will tend to aerate (fizz up) a bit & the pump will whine, but don't worry, just let it sit & start it up later. Dr Terry cheers, is there a drain port ? or just crack the hoses, let it bleed & into it No drain port, no bleeding required. The fluid goes from the reservoir, into the pump, then to the box & back to the reservoir. It "self bleeds". Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
 1 user thanked Dr Terry for this useful post.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 21/04/2017(UTC) Posts: 293 ![Australia]( "Australia") Location: Tolmie Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
|
No drain plug just crack the hoses and let them drain into a bucket.
|
1 user thanked KBM for this useful post.
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
