Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
253 Engine rebuild
Options Go to last post Go to first unread
Previous Topic Next Topic
Maca37 Offline
#1 Posted : Wednesday, 30 August 2023 7:50:23 AM(UTC)
Maca37

Rank: Member

Reputation:

Groups: Registered
Joined: 30/08/2023(UTC)
Posts: 16
Australia
Location: Melbourne

Thanks: 1 times
Hi all

Hoping you can help.I am looking to rebuild my 253 engine in HZ prem wagon.Any suggestions in Melbourne area of rebuilders.
Thanks
Maca37
Back to top
Smitty2 Offline
#2 Posted : Wednesday, 30 August 2023 5:36:16 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: Maca37 Go to Quoted Post
Hi all

Hoping you can help.I am looking to rebuild my 253 engine in HZ prem wagon.Any suggestions in Melbourne area of rebuilders.
Thanks
Maca37


where are you? I know someone in Keysborough who builds/rebuilds Holden V8s (253 and 308)
Club circuit racing...the best fun you can have with your pants on
Back to top
Maca37 Offline
#3 Posted : Wednesday, 30 August 2023 6:45:19 PM(UTC)
Maca37

Rank: Member

Reputation:

Groups: Registered
Joined: 30/08/2023(UTC)
Posts: 16
Australia
Location: Melbourne

Thanks: 1 times
Thanks for the reply.I am in Mordialloc not far fro Keysborough.
Back to top
HK1837 Online
#4 Posted : Wednesday, 30 August 2023 6:59:17 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Winner winner.

Make sure you fit a Quadrajet and 4BBL intake, plus HEI distributor. Or better still a Holley Sniper and Hyperspark.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
Smitty2 Offline
#5 Posted : Thursday, 31 August 2023 9:07:37 AM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: Maca37 Go to Quoted Post
Thanks for the reply.I am in Mordialloc not far fro Keysborough.


ok.. ring Mark @ Autocure Repairs&Motorsport
Fact 11 - 189 Cheltenham Rd, Keysborough, 9706 3518
( he is between Parkmore and EastLink)

tell him I (Smitty) sent you

and also discuss HK's suggestion re carb/ignition improvements with Mark (he also does dyno tuning if needed)
253's go very well with these (Holden fitted them to 253s on later Holdens and Commodores)

Edited by user Thursday, 31 August 2023 9:08:28 AM(UTC)  | Reason: Not specified

Club circuit racing...the best fun you can have with your pants on
Back to top
Maca37 Offline
#6 Posted : Thursday, 31 August 2023 4:04:32 PM(UTC)
Maca37

Rank: Member

Reputation:

Groups: Registered
Joined: 30/08/2023(UTC)
Posts: 16
Australia
Location: Melbourne

Thanks: 1 times
Thanks all.

I start pulling the car apart this weekend for a complete restore!
Back to top
HK1837 Online
#7 Posted : Thursday, 31 August 2023 6:44:14 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
The first official use of the 253 was in the Hurricane and it had a Quadrajet too.

It probably costs more to rebuild a 4.2 than a 5.0, other than buying the block. But you won’t have to spend much on heads as they are normally good enough for the 4.2L. My guess will be 9.5-9.8:1, rebuilt heads, 4BBL intake, Quaddy, HEI dizzy, single 2.5” exhaust and cam/springs to suit the engine, trans, diff ratio and tyres.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
202tonner Offline
#8 Posted : Thursday, 31 August 2023 8:26:12 PM(UTC)
202tonner

Rank: Member

Reputation:

Groups: Registered
Joined: 21/12/2018(UTC)
Posts: 91
Australia
Location: SA

Thanks: 22 times
Was thanked: 11 time(s) in 11 post(s)
Originally Posted by: Maca37 Go to Quoted Post
Thanks all.

I start pulling the car apart this weekend for a complete restore!


Good luck.
If you haven't done it before take lots of pictures as you do it to help remember how it all goes back together.
Back to top
Smitty2 Offline
#9 Posted : Thursday, 31 August 2023 9:42:33 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 379
Australia
Location: bayside Melbourne

Thanks: 237 times
Was thanked: 28 time(s) in 28 post(s)
Originally Posted by: HK1837 Go to Quoted Post
The first official use of the 253 was in the Hurricane and it had a Quadrajet too.

...................


indeed!



Club circuit racing...the best fun you can have with your pants on
Back to top
Maca37 Offline
#10 Posted : Monday, 4 September 2023 9:46:48 AM(UTC)
Maca37

Rank: Member

Reputation:

Groups: Registered
Joined: 30/08/2023(UTC)
Posts: 16
Australia
Location: Melbourne

Thanks: 1 times
Hi all and thanks for the suggestions.
Another couple of questions.
◘Was the original premier front grill plastic insert?
◘Does anyone know where I can get the exterior moulding refurbished?
Back to top
HK1837 Online
#11 Posted : Monday, 4 September 2023 7:30:12 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
All HZ grilles were plastic with stainless surround. Exceptions were the standard cab-chassis which was painted or chromed steel. Caprice which had the top stainless removed and replaced with a chromed die cast piece. And SL/E which was a full plastic piece chromed.

Kingswood, Kingswood SL, GTS, Premier, Ambulance cab-chassis were the same grille just painted differently, although from memory some were grey plastic and some were black.
Deville and Caprice were the same plastic just painted differently plus the top bit as already mentioned. It was actually the same grille as HX Deville and Caprice.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
 1 user thanked HK1837 for this useful post.
Maca37 on 5/09/2023(UTC)
Maca37 Offline
#12 Posted : Wednesday, 6 September 2023 7:42:39 AM(UTC)
Maca37

Rank: Member

Reputation:

Groups: Registered
Joined: 30/08/2023(UTC)
Posts: 16
Australia
Location: Melbourne

Thanks: 1 times
Thanks HK.

Do you know if a HZ wagon tailgate is the same as the tailgate on a ute?
Back to top
wbute Offline
#13 Posted : Wednesday, 6 September 2023 9:52:10 AM(UTC)
wbute

Rank: Veteran

Reputation:

Groups: Registered
Joined: 25/01/2010(UTC)
Posts: 1,124

Thanks: 1 times
Was thanked: 18 time(s) in 17 post(s)
They are different. Wagon has a window in it.
Back to top
Maca37 Offline
#14 Posted : Thursday, 7 September 2023 7:46:15 AM(UTC)
Maca37

Rank: Member

Reputation:

Groups: Registered
Joined: 30/08/2023(UTC)
Posts: 16
Australia
Location: Melbourne

Thanks: 1 times
Good point!
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.047 seconds.