Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
Trimatic 6 to V8 bellhousing, what could go wrongg
Options Go to last post Go to first unread
Previous Topic Next Topic
wannabe51 Offline
#1 Posted : Thursday, 19 February 2009 9:55:06 PM(UTC)
wannabe51

Rank: Member

Reputation:

Groups: Registered
Joined: 5/05/2006(UTC)
Posts: 92
Man
Australia

Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
Hello all,
can anybody advise me why I cannot bolt on a Trimatic V* bell housing to a 6 cyl. Trimatic. My sons 253 ute has a burned out transmission and I want to put in GWO trans from a six.
look forward to your advice.
Dave
Back to top
HK1837 Offline
#2 Posted : Thursday, 19 February 2009 11:29:53 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,897

Thanks: 1 times
Was thanked: 555 time(s) in 530 post(s)
Pump.
Number of clutches.
Speedo drive gear.
Selector location.

Easier and cheaper to find a good 253 or 308 box.

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
adam PERTH Offline
#3 Posted : Friday, 20 February 2009 2:56:05 AM(UTC)
adam PERTH

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 3/08/2007(UTC)
Posts: 1,902
have tried this a few times, not much success.
Was told once by an auto transmission guy that bellhousing and box they are a "machined pair"

and i guess they will warp slightly together over 20 years as well..


WANTED:
QR 662xxx
1984 WB oyster c

Edited by user Friday, 20 February 2009 2:59:36 AM(UTC)  | Reason: Not specified

Old holdens brought on the spot, quick decision, cash paid.
Back to top
Dr Terry Offline
#4 Posted : Friday, 20 February 2009 4:05:13 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,114

Thanks: 1 times
Was thanked: 219 time(s) in 199 post(s)
The two main obstacles when fitting a 6-cyl Tri-Matic auto to a V8 engine, would the bell-housing & the input shaft (different spline & length).

As adam PERTH says, both faces must be flat & not warped otherwise you will have other dramas. As Byron men
If at first you don't succeed, just call it Version 1.0
Back to top
peter_flane Offline
#5 Posted : Friday, 20 February 2009 4:08:13 AM(UTC)
peter_flane

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 22/05/2005(UTC)
Posts: 1,384
I guessed Good Working Order? Am I right?
If it is old or rare - Cut it! http://www.ehlimo.com.au/
Back to top
Dr Terry Offline
#6 Posted : Friday, 20 February 2009 6:06:43 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,114

Thanks: 1 times
Was thanked: 219 time(s) in 199 post(s)
AHH acronyms !!

Dr Terry
If at first you don't succeed, just call it Version 1.0
Back to top
peter_flane Offline
#7 Posted : Friday, 20 February 2009 6:09:30 AM(UTC)
peter_flane

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 22/05/2005(UTC)
Posts: 1,384
quote:
Originally posted by Dr Terry
AHH acronyms !!

Dr Terry
If it is old or rare - Cut it! http://www.ehlimo.com.au/
Back to top
Dr Terry Offline
#8 Posted : Friday, 20 February 2009 6:16:13 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,114

Thanks: 1 times
Was thanked: 219 time(s) in 199 post(s)
Touche

Dr Terry
If at first you don't succeed, just call it Version 1.0
Back to top
wannabe51 Offline
#9 Posted : Friday, 20 February 2009 8:05:51 PM(UTC)
wannabe51

Rank: Member

Reputation:

Groups: Registered
Joined: 5/05/2006(UTC)
Posts: 92
Man
Australia

Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
Thank you all for your advice. the answer is clear, I will repair the original box.
thanks all.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2025, Yet Another Forum.NET
This page was generated in 0.037 seconds.