Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
dose anyone have a uni joint or the retainer caps to suit this type of yoke it is out of my ej and none of the other bajo yokes i have are the same cheers Rhys
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 489 Thanks: 3 times Was thanked: 7 time(s) in 7 post(s)
|
Ruys,they are the same for FX-FJ.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
gees that old now wear do i get one of them from
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC) Posts: 6,060
Thanks: 1 times Was thanked: 203 time(s) in 184 post(s)
|
I believe all Grey motored Holdens used that type of rear uni, up to & including EJ.
Dr Terry
_________________________________________
When calculating a car restoration budget, be as accurate as you can & then double the final figure. It will be closer to the truth. |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 3/08/2007(UTC) Posts: 1,902
|
i may be able to help with one. i will add it to the list of things to do next week.
Tuning for Holley carbs in Perth? PM me. |
Old holdens brought on the spot, quick decision, cash paid. |
|
|
|
Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
cheers rare spares do sell them but as normal they want alot of money for them
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 22/05/2005(UTC) Posts: 1,384
|
Do you have the option of putting one of your other diff centres in? That will allow you to use standard uni joints! What ratio is the one you have out there now, and what other ratio's do you have? What motor are you running? If it is old or rare - Cut it! http://www.ehlimo.com.au/ |
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
nahboth the other banjo's are well and truely stuffed and the ratio in this one is 3.9:1 (or near enough)
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC) Posts: 6,060
Thanks: 1 times Was thanked: 203 time(s) in 184 post(s)
|
Yep, should be 3.89 for any Grey Motor diff.
Dr Terry
_________________________________________
When calculating a car restoration budget, be as accurate as you can & then double the final figure. It will be closer to the truth. |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
and its not going in my car iam just trying to get my mates eh up and going again
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 489 Thanks: 3 times Was thanked: 7 time(s) in 7 post(s)
|
rhuys. I have 3 new old stock ones (all the same), one stamped 3.36, one stamped 3.55, and one with no stamping. Looking at $65 each. email sent. AL. Edited by user Sunday, 19 September 2010 9:01:50 AM(UTC)
| Reason: Not specified
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
sounds good what does that include can you post a pic cheers Rhys
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 489 Thanks: 3 times Was thanked: 7 time(s) in 7 post(s)
|
Rhys,I may have miss read your post, the yokes I have are the same as the picture you posted. AL.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
yes iam after the uni joint that bolts to it
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 489 Thanks: 3 times Was thanked: 7 time(s) in 7 post(s)
|
Any good spare parts dealer should have them......try a diff repairer? al
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/11/2007(UTC) Posts: 114
|
i can get the uni thats easy but not the mount cups the only place i can find is rare spares and they want $150
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.