Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
3 Pages<123
HQ cowl panel
Options Go to last post Go to first unread
Previous Topic Next Topic
Another_HQSS Offline
#41 Posted : Tuesday, 2 September 2014 4:10:18 AM(UTC)
Another_HQSS

Rank: Member

Reputation:

Groups: Registered
Joined: 14/06/2013(UTC)
Posts: 15
Are the HQ panels out of production or just out of stock? (I noticed they are not on the catalogue any more)
Any eta on when you will have them back in?

Also are you setting the press up so you can do a half and half for HJ-Z tonners with the HQ / Commercial front?
(I bought one of the HQ ones when they were in stock and I am tossing up on whether to keep it for my HQ or to cut the dash frame off to fit to my tonner)

Another HQ SS
Back to top
Tour Director Offline
#42 Posted : Wednesday, 3 September 2014 2:14:14 AM(UTC)
Tour Director

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 451
Man
Australia

Was thanked: 15 time(s) in 14 post(s)
The first batch of HQ ones were correct, The second batch rejected due to a production fault. This is being revised and correct stock to be produced, hopefully here by the end of this year. The HJ sample was checked recently and requires slight correction with a new sample due soon. Once approved they will be produced and should be very early 2015. The commercials can be considered once the standard ones are corrected.
Back to top
dwardo75 Offline
#43 Posted : Tuesday, 30 September 2014 6:31:41 PM(UTC)
dwardo75

Rank: Member

Reputation:

Groups: Registered
Joined: 30/09/2014(UTC)
Posts: 1
Just seeing if there is any further development of these panels?
Been chasing one of these for a very longtime
Back to top
Tour Director Offline
#44 Posted : Wednesday, 1 October 2014 6:24:33 PM(UTC)
Tour Director

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 451
Man
Australia

Was thanked: 15 time(s) in 14 post(s)
The factory advises that the revised sample should be coming to us very soon. we will then test it and if approved they will begin production. The stock should then be here very early 2015. We will keep the forum advised. The delay is regrettable but vital that the part is correct.
Back to top
davequey74 Offline
#45 Posted : Tuesday, 3 March 2015 6:30:54 AM(UTC)
davequey74

Rank: Veteran

Reputation:

Groups: Veteran, Registered
Joined: 25/11/2008(UTC)
Posts: 1,496
Any word on when these will be ready?
Back to top
Tour Director Offline
#46 Posted : Tuesday, 3 March 2015 9:17:06 PM(UTC)
Tour Director

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 451
Man
Australia

Was thanked: 15 time(s) in 14 post(s)
The sample was approved and a production batch now shipped to us. they will be inspected and checked on arrival. if approved they will be released into the market. The due date is mid March.
Back to top
AMLagonda Offline
#47 Posted : Friday, 13 March 2015 3:41:26 AM(UTC)
AMLagonda

Rank: Member

Reputation:

Groups: Registered
Joined: 15/10/2005(UTC)
Posts: 6
Oh wow I defiantly might want 2 of these for HZ, Seems easier to replace the whole thing then to repair a corner. :D
Back to top
Tour Director Offline
#48 Posted : Friday, 13 March 2015 7:33:56 PM(UTC)
Tour Director

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 451
Man
Australia

Was thanked: 15 time(s) in 14 post(s)
this shipment of HQ ones is due to arrive in port this weekend. The HJ ones are on order and will be coming in the next couple of months.
Back to top
FastEddysGarage Offline
#49 Posted : Wednesday, 18 March 2015 6:38:58 AM(UTC)
FastEddysGarage

Rank: Member

Reputation:

Groups: Registered
Joined: 22/05/2013(UTC)
Posts: 3
Is there any chance of supplying just the crash pad retaining strip on it's own for those (me!) that have early HQs???
Back to top
Tour Director Offline
#50 Posted : Wednesday, 18 March 2015 7:30:45 PM(UTC)
Tour Director

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 451
Man
Australia

Was thanked: 15 time(s) in 14 post(s)
As you say the first HQ's didn't have the retaining strip but after the crash pads buckled in the heat they were soon added.The factory produces these cowls as a complete finished item at present. They have already produced enough stock for the next few months. I will discuss this request with them.
Back to top
Tour Director Offline
#51 Posted : Saturday, 21 March 2015 1:05:41 AM(UTC)
Tour Director

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 451
Man
Australia

Was thanked: 15 time(s) in 14 post(s)
The shipment of cowl panels has been inspected and approved. they will be released into stock in the next few days and available for sale through the normal process.
Back to top
FastEddysGarage Offline
#52 Posted : Saturday, 18 April 2015 9:57:36 PM(UTC)
FastEddysGarage

Rank: Member

Reputation:

Groups: Registered
Joined: 22/05/2013(UTC)
Posts: 3
quote:
Originally posted by Tour Director
As you say the first HQ's didn't have the retaining strip but after the crash pads buckled in the heat they were soon added.The factory produces these cowls as a complete finished item at present. They have already produced enough stock for the next few months. I will discuss this request with them.


Hi Tour Director,
Did you have this discussion yet? If so, what was the outcome?
Back to top
Tour Director Offline
#53 Posted : Monday, 27 April 2015 9:03:30 PM(UTC)
Tour Director

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 451
Man
Australia

Was thanked: 15 time(s) in 14 post(s)
I have just returned from the factory visit.As advised previously the factory had already completed the HQ cowls and had moved onto the HJ production. they are not prepared to supply just the strips by themselves as they prefer to sell a complete panel.
Back to top
Woodsy Offline
#54 Posted : Tuesday, 7 July 2015 6:10:24 AM(UTC)
Woodsy

Rank: Member

Reputation:

Groups: Registered
Joined: 12/01/2010(UTC)
Posts: 36
They are now available, but check out the price!

http://www.rarespares.ne...tm_campaign=06%2f07%2f15
Cheers

Josh
Back to top
peter_flane Offline
#55 Posted : Tuesday, 7 July 2015 6:32:37 AM(UTC)
peter_flane

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 22/05/2005(UTC)
Posts: 1,384
Well if someone wants one fitted like factory original, we have a spot welder at work. No weld joins.
If it is old or rare - Cut it! http://www.ehlimo.com.au/
Back to top
KeithA Offline
#56 Posted : Wednesday, 8 July 2015 4:26:27 AM(UTC)
KeithA

Rank: Member

Reputation:

Groups: Registered
Joined: 17/09/2010(UTC)
Posts: 154

Thanks: 9 times
If I needed one I wouldn't hesitate paying that.
Back to top
Users browsing this topic
Guest
3 Pages<123
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.217 seconds.