Rank: Member
Groups: Registered
Joined: 14/06/2013(UTC)
Posts: 15
|
Are the HQ panels out of production or just out of stock? (I noticed they are not on the catalogue any more)
Any eta on when you will have them back in?
Also are you setting the press up so you can do a half and half for HJ-Z tonners with the HQ / Commercial front?
(I bought one of the HQ ones when they were in stock and I am tossing up on whether to keep it for my HQ or to cut the dash frame off to fit to my tonner)
|
Another HQ SS |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 451  ![Australia]( "Australia") Was thanked: 15 time(s) in 14 post(s)
|
The first batch of HQ ones were correct, The second batch rejected due to a production fault. This is being revised and correct stock to be produced, hopefully here by the end of this year. The HJ sample was checked recently and requires slight correction with a new sample due soon. Once approved they will be produced and should be very early 2015. The commercials can be considered once the standard ones are corrected.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 30/09/2014(UTC)
Posts: 1
|
Just seeing if there is any further development of these panels?
Been chasing one of these for a very longtime
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 451 ![Australia]( "Australia") Was thanked: 15 time(s) in 14 post(s)
|
The factory advises that the revised sample should be coming to us very soon. we will then test it and if approved they will begin production. The stock should then be here very early 2015. We will keep the forum advised. The delay is regrettable but vital that the part is correct.
|
|
|
|
|
|
Rank: Veteran
Groups: Veteran, Registered
Joined: 25/11/2008(UTC)
Posts: 1,496
|
Any word on when these will be ready?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 451 ![Australia]( "Australia") Was thanked: 15 time(s) in 14 post(s)
|
The sample was approved and a production batch now shipped to us. they will be inspected and checked on arrival. if approved they will be released into the market. The due date is mid March.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 15/10/2005(UTC)
Posts: 6
|
Oh wow I defiantly might want 2 of these for HZ, Seems easier to replace the whole thing then to repair a corner. :D
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 451 ![Australia]( "Australia") Was thanked: 15 time(s) in 14 post(s)
|
this shipment of HQ ones is due to arrive in port this weekend. The HJ ones are on order and will be coming in the next couple of months.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 22/05/2013(UTC)
Posts: 3
|
Is there any chance of supplying just the crash pad retaining strip on it's own for those (me!) that have early HQs???
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 451 ![Australia]( "Australia") Was thanked: 15 time(s) in 14 post(s)
|
As you say the first HQ's didn't have the retaining strip but after the crash pads buckled in the heat they were soon added.The factory produces these cowls as a complete finished item at present. They have already produced enough stock for the next few months. I will discuss this request with them.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 451 ![Australia]( "Australia") Was thanked: 15 time(s) in 14 post(s)
|
The shipment of cowl panels has been inspected and approved. they will be released into stock in the next few days and available for sale through the normal process.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 22/05/2013(UTC)
Posts: 3
|
quote:
Originally posted by Tour Director
As you say the first HQ's didn't have the retaining strip but after the crash pads buckled in the heat they were soon added.The factory produces these cowls as a complete finished item at present. They have already produced enough stock for the next few months. I will discuss this request with them.
Hi Tour Director, Did you have this discussion yet? If so, what was the outcome?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/03/2005(UTC) Posts: 451 ![Australia]( "Australia") Was thanked: 15 time(s) in 14 post(s)
|
I have just returned from the factory visit.As advised previously the factory had already completed the HQ cowls and had moved onto the HJ production. they are not prepared to supply just the strips by themselves as they prefer to sell a complete panel.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/01/2010(UTC)
Posts: 36
|
|
Cheers
Josh |
|
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 22/05/2005(UTC)
Posts: 1,384
|
Well if someone wants one fitted like factory original, we have a spot welder at work. No weld joins. |
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 17/09/2010(UTC)
Posts: 154
Thanks: 9 times
|
If I needed one I wouldn't hesitate paying that.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
