Rank: Veteran
Groups: Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 1,991
Was thanked: 2 time(s) in 2 post(s)
|
I have to remove the fascia which goes around the single din radio on the VR. The heater is stuck on, I have replaced the heater valve but still cooks me in hot weather
The Gregorys says to lever the panel out from the bottom but it seems too stiff and I don't want to break anything.
is there a clip or something.
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058
Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
|
Your will need to remove the panel around the gearshift. That will give you access to the 3 screws at your panel's lower edge. It will then 'clip' out.
You may not need to remove that panel however. Have a look down a the lower RH-side of the heater case (in the footwell area). There is a small vacuum switch there which operates the heater valve, it is usually out of adjustment.
Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 31/08/2006(UTC)
Posts: 108
|
Hi is it that vaccum holds the tap in off? in VN..
I have a VN thats hot all the time. no vaccum at tap..
tony..
|
|
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 1,991
Was thanked: 2 time(s) in 2 post(s)
|
Dr Terry thanks, had a look but couldn't find it. now the bloody horn's not working have to make up a puller for steering wheel the horn works by direct wire but not through the button. Edited by user Tuesday, 29 January 2013 11:43:43 AM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
