Rank: Member
Groups: Registered
Joined: 23/01/2007(UTC)
Posts: 254
|
have just installed performer intake & reco quady on the 307 & it wont idle properly. when driving it`s fine & has plenty of power when i hit the go fast peddle.
at idle the revs drop off then come back up again, i was thinking maybey it`s sucking air some where, gasket not sealing right?
any help would be greatly appreciated.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 17/04/2005(UTC)
Posts: 465
|
If it is sucking air past the gaskets, you will know it. There is a shrill, screaming whistling noise (scared the cr*p out of me, thought it was grinding something.
One thing that I always had trouble with was the PCV's not sealing at idle properly (wen |
__________________________________________
Keep the shiny side up, and the greasy side down. |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 26/08/2006(UTC)
Posts: 671
Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
|
Have you done a base idle and mixture adj since you fitted it all.If so how many turns out are the idle mixture screws.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 23/01/2007(UTC)
Posts: 254
|
hg ss, have adjusted mixture screws out 1.5 turns each, pvc is working fine. thanks
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/11/2005(UTC)
Posts: 268
|
by default the idle screws need to be turned out 2 turns. Put the idle up slightly until you have some idle and then turn the air screws out until you hear the motor running smoother and faster. Once done bring the idle down via the idle screw then check
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 23/01/2007(UTC)
Posts: 254
|
thanks tanart i`ll give it a go in the morning
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 26/08/2006(UTC)
Posts: 671
Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
|
The actual base idle adjust setting on a Qjet is 3 to 4 turns out.If you are only 1.5 turns out I doubt you have a vac leak.Tanarts description will get you set up about right anyway.You may just have to adjust the mixtures and base idle settings down a c Edited by user Sunday, 1 April 2007 7:46:32 AM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
