Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
I looking for a speed sensor for a Turbo 350. Does anyone know if the standard speed sensor out of a Commodore VN Turbo 700 will fit the Turbo 350?
Thanks in advance.
Andrew
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,898
Thanks: 1 times
Was thanked: 556 time(s) in 531 post(s)
|
Yes it will, but you will need to also fit a speedo cable? If you do Kalmaker make an inline sensor that screw into the box and the cable screws into the other end. Plus the Kalmaker speed sensor is a 2 pulse per rev sensor so you dont need a pulse conver |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,898
Thanks: 1 times
Was thanked: 556 time(s) in 531 post(s)
|
Yes it will, but you will need to also fit a speedo cable? If you do Kalmaker make an inline sensor that screw into the box and the cable screws into the other end. Plus the Kalmaker speed sensor is a 2 pulse per rev sensor so you don't need a pulse conve |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/01/2007(UTC)
Posts: 282
|
Hey Byron are you saying that VR ECU/memcal requires 10 pulse and not 2 pulse like VN/P?
Im running VR manual ecu and memcal in my monaro and im running a "T" drive at the tranny.
From the tranny (t700) i have a short cable to the centre of the "t"drive
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,898
Thanks: 1 times
Was thanked: 556 time(s) in 531 post(s)
|
Yes, VR onwards uses 10 pulse for the speedo and ECU. I cant remember what pulse rate the cruise module uses in a VR on, but VN-VP use 2 pulse. If youve modifed ppk however it doesnt matter which speed sensor you use as adjusting that constant will correc |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/01/2007(UTC)
Posts: 282
|
Ahhh ok almost had myself worried for a second as everything works fine as it is.
Yeah im not sure either on the later VR/VS and the VT module pulse rate.
I have them all and stayed with the VN module and used the VS ecotec cable (shorter)for my homemad
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
