Rank: Member
Groups: Registered
Joined: 20/02/2009(UTC)
Posts: 30
|
Hello , i have just finished building my 1979 xd falcon, 351, c10 with 3500 stall , 9 inch all the goodies.
I went for my first test run and 1st to 2nd changes were fine but on the 2nd to third change it locked up the diff and put c10 back into 1st gear. What the???
I have changed the govenor after removing the extension housing and that has not worked, new oil, all gears select when in car , you can drive in any gear but will not go into third, please help
i dont know where to start from here.
Brendan
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 5/06/2005(UTC)
Posts: 1,479
Thanks: 1 times
|
Does the C10 use a vacume hose to the engine manifold? I know the FMX does and without the hose the FMX will not change into third gear.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 20/02/2009(UTC)
Posts: 30
|
Yes it has a hose to base plate on carb, its a compressional lockup just as second is about to change into third, if you drive down the road in car either manually selecting gears or automatically , its just on the second to third shift or change , bang p
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 19/02/2009(UTC)
Posts: 117
|
Did you re-build or get the trans re-built? Sounds like something in the valve body playing up? Does your oil still look clean and not smell burnt?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 20/02/2009(UTC)
Posts: 30
|
No i didnt rebuild tranny, it was in previous car working, i remember turning corner and lost all gears , when i pulled box out i found were the input shaft goes into stall was stripped out. gearbox looked fine , good oil just stall input cog was stripped
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 20/02/2009(UTC)
Posts: 30
|
Sorry 302superbird, last post i said new valve body i meant new vacuum gauge..
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
