Rank: Member
Groups: Registered
Joined: 19/01/2011(UTC)
Posts: 193
Was thanked: 2 time(s) in 2 post(s)
|
Anyone with a wreck in the backyard.......
I'm after a floor crossmember to replace the one that was cut to fit a 4speed on my panelvan. Its the one that the gearbox crossmember is bolted to.
I can replace the whole thing or just a section, & if there is a little of the tunnel still attached then all the better.
Brian |
Stepping stone or stumbling block...your choice |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/04/2010(UTC)
Posts: 285
|
Where are u located? I have a couple of cars I am wrecking out but am in Central Queensland. |
Alex |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 19/01/2011(UTC)
Posts: 193
Was thanked: 2 time(s) in 2 post(s)
|
In the ACT, but I can arrange a courier for pick up.
I'm going out to the shed tomorrow, so I'll get some pickies of the mess and hole so as to get an idea of the bit needed.
Brian |
Stepping stone or stumbling block...your choice |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 23/07/2010(UTC)
Posts: 690
Was thanked: 1 time(s) in 1 post(s)
|
quote:
Originally posted by Bruvpig
Anyone with a wreck in the backyard.......
I'm after a floor crossmember to replace the one that was cut to fit a 4speed on my panelvan. Its the one that the gearbox crossmember is bolted to.
I can replace the whole thing or just a section, & if there is a little of the tunnel still attached then all the better.
Brian
i can supply whateva you need, whether its a section or whole cross brace?? just specify if HK or HT/G also tunnel section (just give me min. measurement of what you need) regards dave 0412109239 www.bellarineclassicautos.com.au
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 16/09/2010(UTC) Posts: 410  Thanks: 12 times
Was thanked: 2 time(s) in 2 post(s)
|
quote:
Originally posted by Bruvpig
Anyone with a wreck in the backyard.......
I'm after a floor crossmember to replace the one that was cut to fit a 4speed on my panelvan. Its the one that the gearbox crossmember is bolted to.
I can replace the whole thing or just a section, & if there is a little of the tunnel still attached then all the better.
Brian
I've got 3 or 4 I'm about to chop up in the next few days. Give me a call on 0409 691 119. I'm in Adelaide. |
The HKTG Garage. The Home of HK HT HG Holden. |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 19/01/2011(UTC)
Posts: 193
Was thanked: 2 time(s) in 2 post(s)
|
Thanks guys!!.
I'll post the photos and measurements of the bits I need tomorrow if I'm near the 'puter.
It's for a HK panelvan if it makes a difference. (I know about the mounting holes for the crossmember)
Now if anyone has a panelvan...... the top tailgate catches... they look like a flattened wingnut... and the puzzle is complete.
Brian |
Stepping stone or stumbling block...your choice |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 19/01/2011(UTC)
Posts: 193
Was thanked: 2 time(s) in 2 post(s)
|
Hi guys.
About 250mm from the center of the hump each way, and 300mm from the back edge of the crossmember toward the firewall off of the tunnel is needed. The hole is on the top of the tunnel.
Give me an email with costs etc.
Many thanks for your replies.
Brian |
Stepping stone or stumbling block...your choice |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 19/01/2011(UTC)
Posts: 193
Was thanked: 2 time(s) in 2 post(s)
|
Hi guys.
About 250mm from the center of the hump each way, and 300mm from the back edge of the crossmember toward the firewall off of the tunnel is needed. The hole is on the top of the tunnel.
Give me an email with costs etc.
Many thanks for your replies.
Brian |
Stepping stone or stumbling block...your choice |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
