Rank: Member
Groups: Registered
Joined: 16/09/2009(UTC) Posts: 358
Was thanked: 1 time(s) in 1 post(s)
|
Hey team
I'm trying to install an under guard washer bottle in the G to clear up some room for the battery and fuse box in the engine bay.
I've got a VS and a VT under guard washer bottle here and they don't really work for different reasons.
Anyone know of any other cars that have them??
Will check them out and see if I can get one to fit.
Cheers
Jeremy |
The G will roll again.... eventually |
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC) Posts: 2,898
Was thanked: 2 time(s) in 2 post(s)
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/03/2005(UTC) Posts: 3,135
Thanks: 1 times Was thanked: 35 time(s) in 33 post(s)
|
What about cutting the filler neck off a few inches from the top & using a length of radiator hose & 2 clamps to relocate it to a better position? |
Cheers,
Mick _______________________________________________________________
Judge a successful man not on how he treats his peers, but on how he treats those less fortunate. |
|
|
|
Rank: Member
Groups: Registered
Joined: 16/09/2009(UTC) Posts: 358
Was thanked: 1 time(s) in 1 post(s)
|
Thanks Lads Had another look this arvo and I may as well try to modify the VS one - no good to me anyway. Need to cut it down low at the bottle and move it accross. Should be able to glue/fibreglass something together. Problem is the filler neck is exactly the same width as the corner I need to put it - next to the recess for the washer pump. Gotta move the filler neck down in both these pictures below. Cheers Jeremy |
The G will roll again.... eventually |
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.