Rank: Member
Groups: Registered
Joined: 10/02/2012(UTC) Posts: 4
|
Hi guy,s can anyone please tell me if a tow bar from a vy sedan will fit straight onto a vz wagon or do i have to change anything. Cheers.
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC) Posts: 6,058
Thanks: 1 times Was thanked: 203 time(s) in 184 post(s)
|
AFAIK the towbars for VT/VX/VY/VZ sedan & wagon all interchange.
Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
Rank: Member
Groups: Registered
Joined: 11/08/2008(UTC) Posts: 916
Thanks: 2 times
|
They come in two flavours, 1600kg and 2100kg.
Both require the installation of...
1/ Tail shaft centre bearing heat shield. 2/ ADR label, different one for each type. 3/ Insulation in the spare wheel well.
First 2 can come off the VY, you are supposed to use new bolts for the heat shield and the insulation is just Dynamat type stuff which in the wagon should be put on the left side of the spare wheel well vertical face to insulate against exhaust heat.
The 2100kg req's the use of 2 shackles. The 2100kg also has a beefier spare wheel well brace, you'll be drilling holes. The 2100kg req's the use of superlift rear shockers.
Basically whatever is on the VY has to go onto the VZ and don't forget to get the trailer wiring harness out of the VY. It runs from r/h tail light area to the trailer plug socket and will be obvious once you see it. If the VY is a goer you can reconnect it's tail light wiring back to stock because the trailer harness in only an extension.
Anything that you can't get can be bought at your friendly local Holden dealer.
I only say all of this because insurance companies have a way of dodging claims on minor issues.
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.