Rank: Newbie
Groups: Registered
Joined: 7/04/2017(UTC) Posts: 3 Location: Perth WA
|
Hi Folks,
I have a shortened Ford 9" in an EH Holden and I'm looking to change to something that has a different ratio. I believe the current ratio is at 3.55 and I want to move to around 3.1 I'm running a TH350 auto. Is anyone running similar setup with a V8 auto and 14" wheels who can advise on ratio to select for good balance between acceleration and 100km/hr cruise rpm.
|
|
|
|
Rank: Veteran
Groups: Registered
Joined: 26/02/2009(UTC) Posts: 1,638
Thanks: 16 times Was thanked: 27 time(s) in 25 post(s)
|
3.50:1 is the ratio and 3.00:1 you are talking about their.
What V8 is it and what mods.
If it's a stock or near stock 308 or 350 I would go with the 3.00:1 in a 14in wheel EH to get the best balance performance.
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/04/2017(UTC) Posts: 3 Location: Perth WA
|
The engine is a 350 with mild cam so has plenty of horsepower. Thanks for the advice.
|
|
|
|
Rank: Veteran
Groups: Registered
Joined: 26/02/2009(UTC) Posts: 1,638
Thanks: 16 times Was thanked: 27 time(s) in 25 post(s)
|
Originally Posted by: Crazycat63 The engine is a 350 with mild cam so has plenty of horsepower. Thanks for the advice. If you want to get off the line a bit quicker look at a higher stall converter and the 3.00:1 should be fine or look for the 3.25:1 gear 9 inch if you drive more around town type driving but out on the highway 3.50:1 could be a bit to low.
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 7/04/2017(UTC) Posts: 3 Location: Perth WA
|
I think I will start searching for parts to go the 3.00:1 ratio option. Most of my driving these days is street cruising or club runs.
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.