Rank: Newbie
Groups: Registered
Joined: 26/08/2018(UTC) Posts: 3 ![Trinidad And Tobago]( "Trinidad And Tobago") Location: Arima Thanks: 6 times
|
Hi, I want to move the TOP INLET from the RIGHT SIDE to the LEFT SIDE and the BOTTOM outlet from the LEFT SIDE to the RIGHT SIDE. The transmission cooler is on the LEFT side. Would that change cause any MAJOR problems? Thanks
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
No. They normally spin the top tank around and blank the holes but just move the bottom spout.
From what you are saying you want to convert a Holden V8 radiator to a 6cyl or SBC radiator? |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 26/08/2018(UTC) Posts: 3 ![Trinidad And Tobago]( "Trinidad And Tobago") Location: Arima Thanks: 6 times
|
To a sbc engine. So let me see if I understand.... If I spin the top tank around, the inlet will now be facing outward. I will then remove the inlet, block it off, cut a new hole on the Left side and weld the spout. Is that correct?
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
Yes, I think that is how they do it. You could also find a 6cyl HD radiator and the spouts are in the right spot for a SBC, but need to be bigger.
Normally you move the bottom spout to the top and put a new (bigger) one on the bottom for a SBC so they are the right size.
Note also for an iron headed 350 or bigger a 3 row V8 radiator may be too small, you will need a new 4 row. |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
