Fastlane
»
Holden Forums
»
Holden Technical Talk
»
Vehicle not wanting to start after timing belt replacement
Rank: Newbie
Groups: Registered
Joined: 23/09/2024(UTC) Posts: 2
|
Hello, I have a Holden RG Colorado 06/2012. Just did a timing belt replacement, everything went smoothly with it. Once we reassembled everything the vehicle did not want to start (it would crank though). Disconnected the Camshaft position sensor and the vehicle started. Plugging in the sensor again the vehicle did not want to start. Tested the sensor and it was working but to be sure it was replaced and the issue still occurs. Seeking guidance on what to do
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/07/2019(UTC) Posts: 373 Location: bayside Melbourne Thanks: 233 times Was thanked: 28 time(s) in 28 post(s)
|
Originally Posted by: Birderc1 Hello, I have a Holden RG Colorado 06/2012. Just did a timing belt replacement, everything went smoothly with it. Once we reassembled everything the vehicle did not want to start (it would crank though). Disconnected the Camshaft position sensor and the vehicle started. Plugging in the sensor again the vehicle did not want to start. Tested the sensor and it was working but to be sure it was replaced and the issue still occurs. Seeking guidance on what to do check the sensor ground and harness to it... something screwy in the electrics here |
Club circuit racing...the best fun you can have with your pants on |
|
|
|
Rank: Newbie
Groups: Registered
Joined: 23/09/2024(UTC) Posts: 2
|
Checked the ground to the sensor and it seemed to be ok. Starting to suspect maybe something hasn’t “synced” since the timing. Not sure what else to test for.
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC) Posts: 6,054
Thanks: 1 times Was thanked: 200 time(s) in 182 post(s)
|
My guess is that the cam timing is slightly out. The ECU can see that & won't let it start. Disconnect the cam sensor & it cannot see that the timing is out, so then it starts.
Dr Terry |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
Fastlane
»
Holden Forums
»
Holden Technical Talk
»
Vehicle not wanting to start after timing belt replacement
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.