Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
Hi,
I have been researching new rims to fit my HZ wagon for a while now. I have found some 17" ROH RT's that have the correct PCD (5x120.65mm), however I am unsure of their offset and if they will be to big to fit. They are 17"x9" and 17"x8" and I was told that they have '4 INCH BACK SPACE'. Can someone tell me if that is the same as the offset?? I am guessing that the distance from the outer rim to the plate where the wheel nuts are secured is 4".
Anyways if anyone can help or has experience with RT's I would appreciate hearing your tale.
Cher.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/05/2005(UTC)
Posts: 85
|
http://www.rsracing.com/tech-wheel.html shows what you need to know. Also i would check with a tyre shop who should be able to tell you the backspacing and offset numbers you need. Rock n Roll Edited by user Monday, 12 December 2005 2:22:16 AM(UTC)
| Reason: Not specified |
Rock n Roll |
|
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 2,047
|
Check the law in your state , in SA you can only go 2 inches bigger in dia from factory , a mate had 18`s on a VS calias and was defected as factory was 15inch = 3inches , HJ was 14 inch so 16 might be the biggest . A lot of people get away with it but if
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
