Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC)
Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
I have just snapped something in the column of my 3 on the tree HK. And my 3 speed is dead. I was having problems selecting gears so I serviced the gearbox. There was about half a litre of oil in it (which was like water) and after changing the oil, the gears still get stuck.
So now i need some info about what I can do/ what will fit.
at the moment it has a 173 with a HK 3 speed
what will bolt straight up? because HK 3 speeds in good condition are getting hard to find. I'd prefer something that bolts up to the same bellhousing.
HT or HG 3 speed (i heard they were slightly different. all synchro???
HQ-HZ 3 speed?
4 speed?
Since the column is stuffed I was just going to convert to floor shift
any help would be great
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 24/04/2005(UTC)
Posts: 718
|
If you're in Adelaide I can sell you a complete column from a HG Kingswood for $50 including linkages etc.
It's a 3 speed, currently bolted to a 186 so it should fit no problems.
email 'munromad2004 at yahoo dot com'
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,069
Thanks: 1 times
Was thanked: 207 time(s) in 188 post(s)
|
Hi sot.
If it's an HK it's most likely a 3-speed crash box (no synchro on 1st). The 3 sp all syncro was an option for HK but not common. It is standard though on both HT & HG.
It's probably jusy as easy to get a complete 3nd hand, column & box out o |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
