Rank: Member
Groups: Registered
Joined: 1/06/2007(UTC) Posts: 204
|
a mates VB sle has 308 th400 and 2.60 diff, not enough take off for him thinking of changing to a 3.08 out of fuel injected VK 6cyl . Its a daily driver around town but what rev range might it have on the highway and is it ok to use this diff I know that they run V8 running gear to deal with the fuel injection but still will it handle it . thanx dudes
its beer o'clock |
On The Other Hand There's Finger's |
|
|
|
Rank: Member
Groups: Registered
Joined: 24/04/2005(UTC) Posts: 718
|
3.08 will be fine. It was probably the most popular ratio in V8 HQ-HZs.
I guess around 3000 rpm at 100km/hr would be about right.
However I have no idea about the differences in VB V8 diffs and VK 6cyl diffs.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 24/04/2005(UTC) Posts: 718
|
3.08 will be fine. It was probably the most popular ratio in V8 HQ-HZ's.
I guess around 3000 rpm at 100km/hr would be about right.
However I have no idea about the differences in VB V8 diffs and VK 6cyl diffs.
|
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 3/08/2007(UTC) Posts: 1,902
|
VB 5.0 diff = 10 Bolt sailsbury VK 6 Cyl diff = 8 Bolt (round) sailbury (Banjo internals) not as strong, but cheap and pleantiful if it lets go.
A1 Bogan. |
Old holdens brought on the spot, quick decision, cash paid. |
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/08/2006(UTC) Posts: 1,307
|
hey hz dude, what revs are you doin with the 2.76 diff, at 100k,s???
ptpro |
more than basketcase than a bear! DOH!!! |
|
|
|
Rank: Veteran
Groups: Registered, Veteran
Joined: 3/08/2007(UTC) Posts: 1,902
|
normally around 2700 with 14"
A1 Bogan. |
Old holdens brought on the spot, quick decision, cash paid. |
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 2/08/2006(UTC) Posts: 1,307
|
i think i want one of them ratio,s in my new diff, thanks again adam
ptpro |
more than basketcase than a bear! DOH!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 1/06/2007(UTC) Posts: 204
|
adam perth I have 2 VK fuel injected diffs both are 10 bolt oval disk brake. Ive never seen 8 bolt in a injeceted 6cly. always been 10 bolt in my case maybe Im just lucky. as for the rev range its a 2.60 and it hasn't made it to the highway yet but m Edited by user Wednesday, 12 September 2007 7:41:51 PM(UTC)
| Reason: Not specified |
On The Other Hand There's Finger's |
|
|
|
Rank: Member
Groups: Registered
Joined: 1/06/2007(UTC) Posts: 204
|
adam perth I have 2 VK fuel injected diffs both are 10 bolt oval disk brake. Ive never seen 8 bolt in a injeceted 6cly. always been 10 bolt in my case maybe Im just lucky. as for the rev range its a 2.60 and it hasnt made it to the highway yet but my Edited by user Wednesday, 12 September 2007 7:41:51 PM(UTC)
| Reason: Not specified |
On The Other Hand There's Finger's |
|
|
|
Rank: Guest
Groups: Guests
Joined: 2/09/2015(UTC) Posts: 43,977
Was thanked: 5 time(s) in 5 post(s)
|
i want to put a vk commodore gearbox and diff in my hr. I want 3.08 diff i do a fair bit of highway use and i want to get my rev range down at 100
|
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2005(UTC) Posts: 243
|
If the tyres were 14 inch 3.55 about 3000rpm 3.08 should be about 2600rpm 2.78 about 2300rpm 2.60 about 1950 rpm ......all at 100k alot of rev counter arent super accurate....the dyno is more so....
|
|
|
|
Rank: Member
Groups: Registered
Joined: 29/08/2005(UTC) Posts: 243
|
If the tyres were 14 inch 3.55 about 3000rpm 3.08 should be about 2600rpm 2.78 about 2300rpm 2.60 about 1950 rpm ......all at 100k alot of rev counter aren't super accurate....the dyno is more so....
|
|
|
|
Rank: Member
Groups: Registered
Joined: 26/08/2006(UTC) Posts: 671
Thanks: 1 times Was thanked: 1 time(s) in 1 post(s)
|
The up/down side of 2.60 diff gears are that you need good power to drive them to high speeds. A HX wgn std 202 auto a mate owned did a max speed of 130 kmh with 3.08 diff ratio and could only manage 110 kmh with a 2.78 diff and the hills killed it. It ju
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/09/2007(UTC) Posts: 1
|
dose anyone have a 3.08 banjo 4 sale
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.