Rank: Member
Groups: Registered
Joined: 11/10/2012(UTC)
Posts: 247
|
Hi can anyone tell me if muncie inspection covers are the same as saginaw ones and are they also the same as truck?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 16/04/2014(UTC) Posts: 768  Location: Victoria Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
|
Muncie and Saginaw are completely different in many ways.
There are different numbers of attaching bolts in the side cover, but most importantly the reverse selector is in the side cover on a Saginaw, but in the extension housing on a Muncie.
I don't know what you mean by "The same as truck"
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
I think he means the clutch inspection cover. These should be specific to the bellhousing not to Saginaw/Muncie/T10 as they are at the engine side of the bellhousing. I think you'll find the truck one should be the same too but these would normally be 11" or bigger flywheel. |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 16/04/2014(UTC) Posts: 768 Location: Victoria Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
|
I think you might be right. Nothing at all to do with the gearbox.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/10/2012(UTC)
Posts: 247
|
Yes i mean the clutch inspection cover. It bolts to the bellhousing not the engine so thats why im asking if its the same. My bellhousing is an 11 inch one with an adaptor ring to suit the smaller front bearing retainer. I have no clutch inspection cover at all and need one for my muncie. Thanks guys.
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
I'd say you just need an 11" one, not sure if they are different. A quick check of HK and HT/G parts catalogue will tell you if they are the same for 10.5 and 11". |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/10/2012(UTC)
Posts: 247
|
Thanks mate ill try to find those numbers somewhere. Apparently its just the depth of the bellhousing. Its just a little fuller towards the rear of the bellhousing. If i could work out how to put up pics i would. Edited by user Wednesday, 28 October 2015 7:12:51 PM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 16/04/2014(UTC) Posts: 768 Location: Victoria Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
|
The 11" HT350 bellhousing is 3899621 (part number and casting number) and uses cover 38433943.
The 10.5" HK307/327 bellhousing is part number 3858402(casting number 3858404) and the cover is 3788422.
So yes, they are different.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
