Rank: Member
Groups: Registered
Joined: 13/03/2014(UTC)
Posts: 55
Thanks: 6 times
Was thanked: 4 time(s) in 4 post(s)
|
Looking for a replacement heater on/off valve.
I believe it's the 3 port vacuum type, I have a HJ with integrated factory air and 5 litre motor.
At the moment there is no valve at all so water flowing through the heater core all the time.
Are these still available or is there one from another make model that would work?
Thanks
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
Very hard to find. I paid over $300 for a NOS one over 4 years ago. You will find something to work but won't look right. You are up against HQ GTS350 owners bidding on these. |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 30/04/2005(UTC) Posts: 470  ![New Zealand]( "New Zealand") Was thanked: 15 time(s) in 14 post(s)
|
Hi, HJ without ADR27A is as you thought 3 port 2822620( AC Delco 15-50574 may do) with ADR27A is 2 port 500956 same as HQ 350' Mark. |
life is good in "Wine & Holden Marlborough " |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/05/2016(UTC) Posts: 151 ![Australia]( "Australia") Location: SEQld Thanks: 11 times
Was thanked: 3 time(s) in 3 post(s)
|
Heater valve...UMM...I am a old fella...Do you mean the vacuum tap, is that the same?...Sorry. 3 way here on fleabay...Could work. http://www.ebay.com.au/i...ae37:g:GVcAAOSwzaJX2PUl
My integrated air con jobs only have the 2 way vac type. Edited by user Sunday, 14 May 2017 2:39:59 PM(UTC)
| Reason: more info
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/03/2014(UTC)
Posts: 55
Thanks: 6 times
Was thanked: 4 time(s) in 4 post(s)
|
Thanks guys for your assistance and advice.
My HJ is build date 8/75, is this pre ADR27A? Not sure but I thought all that pollution crap started on HX series.
Just want to make sure the 3 port valve is the correct one for my car.
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
Identical to my car. It is a 3 port metal valve with a lever actuated by vacuum operator. As I said almost impossible to find |
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/03/2014(UTC)
Posts: 55
Thanks: 6 times
Was thanked: 4 time(s) in 4 post(s)
|
Could someone post a photo of the original factory item or an engine bay shot of the factory set up.
Thanks
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/05/2016(UTC) Posts: 151 ![Australia]( "Australia") Location: SEQld Thanks: 11 times
Was thanked: 3 time(s) in 3 post(s)
|
From what i have read here and on a few other forums a original GMH one is pertant near impossible to find,as HK said...
There are other vacuum 3 ways from other makes at a fair price on ebay...I see them listed off a Saab and Vectra plus in the USA's ebay...
Postage costs are expensive from the US tho.
Winter is here so you will have it on anyway lol.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/03/2014(UTC)
Posts: 55
Thanks: 6 times
Was thanked: 4 time(s) in 4 post(s)
|
Griffo, the Vectra one will work, should be able to make it look half decent.
Thanks for the advice.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/08/2016(UTC)
Posts: 46
Thanks: 11 times
Was thanked: 11 time(s) in 9 post(s)
|
Are you sure it is a 3 way valve ?I have a 2 way valve on my factory hq 350 with a/c which is factory correct.The brand is Delco
Ranco with a vacuum pick up on the top.I have tried to post a photo but I cannot work out how to do it.Can anyone show me how?
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717
Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
|
They are definitely 3 way. I made a mistake earlier saying they were the same as HQ 350 - I bought a complete HQ 350 engine and transmission setup a while back and it had one on it, but it may have been an original non-350 but A/C car (these are the same part number as HJ vacuum heater tap). See this old thread: http://www.fastlane.com....cuum-switch-WANTED.aspx
|
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/05/2016(UTC) Posts: 151 ![Australia]( "Australia") Location: SEQld Thanks: 11 times
Was thanked: 3 time(s) in 3 post(s)
|
Originally Posted by: LS350  Are you sure it is a 3 way valve ?I have a 2 way valve on my factory hq 350 with a/c which is factory correct.The brand is Delco
Ranco with a vacuum pick up on the top.I have tried to post a photo but I cannot work out how to do it.Can anyone show me how? Ok here is how I post a pic on forums......(if i remember right) Open a new page and google up a picture hosting site...lets say TinyPic. Scroll down to choose file and click,then a selection of where the file /pic is to be taken from...I stick the pic on my desk top so i can find it easy just for posting. Highlight image it probably will be highlighted anyway....scroll down to the upload button and click..A pop up may come up so just answer the question. Another page will come up ...click on the 2nd one down that says IMG code for forums and message boards,copy it...then waste here or your forum ...I just did it...hope it works  Edited by user Monday, 15 May 2017 6:08:55 PM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 13/08/2016(UTC)
Posts: 46
Thanks: 11 times
Was thanked: 11 time(s) in 9 post(s)
|
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
