Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
"off the shelf" 307 exhaust. - does anyone make them?
Options Go to last post Go to first unread
Previous Topic Next Topic
KBM Offline
#1 Posted : Monday, 30 October 2017 7:06:40 PM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
Anyone know of any exhaust outfit that can supply/ship a new exhaust system for a HK with a 307 chev column shift auto. I'm after an original looking setup from the "rams horn" flanges to the tail pipe. My car is a bit off finishing but i'd like to be able to start the already run in motor regularly to keep it lubed and make it easier to move around. Distance/cost makes it impossible to take car to a shop at this stage. Thanks, greg.
Back to top
HK1837 Offline
#2 Posted : Monday, 30 October 2017 7:25:09 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Try Settlement Road Exhausts in Victoria.

These guys:
https://m.ebay.com.au/it...cfffb3c88%257Ciid%253A4

I’d try and get a replica GTS327 system, these were option N10 on 307 other than Brougham.

Edited by user Monday, 30 October 2017 7:37:31 PM(UTC)  | Reason: Not specified

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
KBM Offline
#3 Posted : Monday, 30 October 2017 8:12:09 PM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
Thanks Byron, I've seen these guys advertised before for their mufflers. I'll give 'em a try and see if they do the whole system. I know the GTS327 system will make it breathe better but for my panelvan I'd prefer to keep with the single tailpipe out to the side as per original.
Back to top
HK1837 Offline
#4 Posted : Monday, 30 October 2017 8:28:16 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Read the text in the auction, they say they do a full system.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
KBM Offline
#5 Posted : Tuesday, 31 October 2017 6:15:22 AM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
the full system in the text is unfortunately for the 186S not the v8. Settlement Road Exhaust got straight back to me with a sorry no for the 307 exhaust. the search continues.
Back to top
gmholdman Offline
#6 Posted : Tuesday, 31 October 2017 7:52:36 AM(UTC)
gmholdman

Rank: Member

Reputation:

Groups: Registered
Joined: 2/03/2005(UTC)
Posts: 489
Australia

Thanks: 3 times
Was thanked: 7 time(s) in 7 post(s)
KBM, try Dwayne at HI-TECH EXHAUSTS 93125066. AL.
Back to top
HK1837 Offline
#7 Posted : Tuesday, 31 October 2017 7:55:32 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Originally Posted by: KBM Go to Quoted Post
the full system in the text is unfortunately for the 186S not the v8. Settlement Road Exhaust got straight back to me with a sorry no for the 307 exhaust. the search continues.


At least they do the muffler and tailpipe as they are the same afaik.

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
KBM Offline
#8 Posted : Tuesday, 31 October 2017 1:08:54 PM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
Thanks gmholdman, I'll give him a ring. The muffler is the same Byron the only difference to tailpipe is on van and wagon it comes out the side instead of out the back to stop drawback of fumes through tailgate.
Back to top
 1 user thanked KBM for this useful post.
Oldolden on 31/10/2017(UTC)
HK1837 Offline
#9 Posted : Tuesday, 31 October 2017 3:18:36 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
That shouldn’t be hard to fabricate though. The only one I have is a mint system off a HK Brougham we pulled apart. The whole car was perfect. Simply modified the tailpipe for a coupe.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
 1 user thanked HK1837 for this useful post.
Oldolden on 31/10/2017(UTC)
KBM Offline
#10 Posted : Tuesday, 31 October 2017 6:30:08 PM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
I've got an original small diameter tailpipe off a wagon so I can get the bends in the right place, especially at the end as it's not a straight cut. it looks like a slice across a 90 degree bend. as far as your mint system, seeing as it's in such good condition, it would be easy to unbolt it without any damage and get it copied. If rare spares or a reputable exhaust shop got a copy you'd make a lot of Hk restorers happy.
Back to top
HK1837 Offline
#11 Posted : Tuesday, 31 October 2017 8:05:58 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
It will be coming out eventually along with the 307, powerglide and 2.78 LSD banjo and all be stuck up on the pallet racking. I have located the original engine for the car too but it still hasn't changed my mind to upgrade it to 350, TH350 and 9" with hybrid 327 system (extractors, XY/XA GT resonators and the original back end). So when I get the time to pull it all out it could be copied then. Won't be probably until at least this time next year though.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
KBM Offline
#12 Posted : Thursday, 2 November 2017 6:38:22 PM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
Hi-tech exhaust replied promptly with unfortunately another no. It's a shame you can't buy exhaust systems off the shelf for the old'uns but
"such is life"
Back to top
gm5735 Offline
#13 Posted : Thursday, 2 November 2017 8:04:44 PM(UTC)
gm5735

Rank: Member

Reputation:

Groups: Registered
Joined: 16/04/2014(UTC)
Posts: 768
Man
Location: Victoria

Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
I might be able to help with this one.
Please send me a PM.
Back to top
KBM Offline
#14 Posted : Friday, 3 November 2017 6:43:25 AM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
Thanks gm5735, pm sent.
Back to top
Silverfox Offline
#15 Posted : Tuesday, 7 November 2017 8:14:16 PM(UTC)
Silverfox

Rank: Member

Reputation:

Groups: Registered
Joined: 24/11/2008(UTC)
Posts: 435

Thanks: 7 times
Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: HK1837 Go to Quoted Post
It will be coming out eventually along with the 307, powerglide and 2.78 LSD banjo and all be stuck up on the pallet racking. I have located the original engine for the car too but it still hasn't changed my mind to upgrade it to 350, TH350 and 9" with hybrid 327 system (extractors, XY/XA GT resonators and the original back end). So when I get the time to pull it all out it could be copied then. Won't be probably until at least this time next year though.




Hi Byron

Is there a reason for using XY/XA resonators? Better note or do they look the same as the 327 GTS resonators?

Cheers
Nick.

Edited by user Tuesday, 7 November 2017 8:14:59 PM(UTC)  | Reason: Not specified

"HOLDEN MONARO. OUT TO DRIVE YOU WILD!"
Back to top
HK1837 Offline
#16 Posted : Tuesday, 7 November 2017 8:55:21 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
Nick, heaps smaller and offset pipes to one side so will work with the HK crossmember and extractors. Ideally XW GT resonators would be better as they are half the size but they are almost extinct and the damn GT guys won’t let me have any!
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
HK1837 Offline
#17 Posted : Friday, 10 November 2017 7:08:49 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
https://www.gumtree.com....-wagon-panel/1051458026

These guys do van tailpipes. Also have 186S rear muffler.

Edited by user Friday, 10 November 2017 7:10:43 PM(UTC)  | Reason: Not specified

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
KBM Offline
#18 Posted : Saturday, 11 November 2017 7:01:34 AM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
Thanks Byron, I've already bought the muffler from settlement rd exhaust. I'll give these guy's a go for the tailpipe.
Back to top
HK1837 Offline
#19 Posted : Saturday, 11 November 2017 8:43:02 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,717

Thanks: 1 times
Was thanked: 512 time(s) in 488 post(s)
You might have to get the muffler and tailpipe in, and trailer it to a shop for the front part, which is only pipes. Do you have the heat shield and rubbers for the hangers and the hangers?

Rubbers:
http://www.ebay.com.au/i...4133:g:xTkAAOSwSHZWde6V

Hanger and bolt:
https://www.ebay.com.au/...5c4f:g:3dMAAOSw6YtZO23u

_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Back to top
KBM Offline
#20 Posted : Saturday, 11 November 2017 10:15:49 AM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
heat shield and hangers are in place. gm5735 is looking into possible copy of front pipes for me, so hopefully i'll get all the pieces together and wont have to trailer the car to a shop.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.058 seconds.