Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

11 Pages«<678910>»
Smitty2 Offline
#141 Posted : Sunday, 18 April 2021 6:07:00 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 347
Australia
Location: bayside Melbourne

Thanks: 216 times
Was thanked: 26 time(s) in 26 post(s)
Originally Posted by: castellan Go to Quoted Post
[quote=wbute;180027]I........................

Due to the Jap currency jumping up with the Nissan 3.0L 6 cyl in the VL. Holden had to jump to that USA chaff cutter V6 what a shocking noisy engine it was, Hell even the Red motors were more refined than that junk.


ummm... wrong way round! The VL was due to get the US based V6 but GMH were running behind in development (mainly coz the V6 was originally an 'East West' Engine)
and so Holden needed an engine for VL quick smart!

The Fishermens Bend Supply guys were given mission impossible.... find an engine that did this/did that/complied with our new soon to be Unleaded petrol ADRs
and do IT NOW! So the engineering guys can do their bit. All this as VL body design was being signed off mid 84....

The Nissan engine turned out so well (*head gasket issues aside) , that it was slated to go into VN . But yes, the Pacific Peso (aka the Aussie $) went south against
the Yen and an original $1800 engine (as originally costed) was costing GMH over $3,000 per car! The deal (to buy Nissan engines) should have been done in $USD
but Nissan insisted it be in Yen. Normally... not an issue, until the AUD$ became the overpriced in Forex markets. And sank ....

Edited by user Sunday, 18 April 2021 6:08:12 PM(UTC)  | Reason: Not specified

Club circuit racing...the best fun you can have with your pants on
Shearer Offline
#142 Posted : Sunday, 18 April 2021 6:55:59 PM(UTC)
Shearer

Rank: Member

Reputation:

Groups: Registered
Joined: 8/11/2009(UTC)
Posts: 122
Man

Thanks: 1 times
In my opinion, I think the Buick V6 suited the VN. Yes the RB30 was smooth, but low end power wasn't its strong point...neither was that Jatco 4 speed auto. The V6 had a lot more low end torque than the RB30 and from also a maintenance point of view a self adjusting serpentine belt and no more distributor. No more flat spots unlike the fiddly ignition on RB30...

The VN 3.8 litre V6 gave a marketing advantage against the EA's 3.9 litre -even the optional multi-point version didn't even have a 'Get up and Go' of the VN V6.
castellan Offline
#143 Posted : Monday, 19 April 2021 11:33:16 AM(UTC)
castellan

Rank: Veteran

Reputation:

Groups: Registered
Joined: 26/02/2009(UTC)
Posts: 1,606

Thanks: 13 times
Was thanked: 27 time(s) in 25 post(s)
Originally Posted by: Shearer Go to Quoted Post
In my opinion, I think the Buick V6 suited the VN. Yes the RB30 was smooth, but low end power wasn't its strong point...neither was that Jatco 4 speed auto. The V6 had a lot more low end torque than the RB30 and from also a maintenance point of view a self adjusting serpentine belt and no more distributor. No more flat spots unlike the fiddly ignition on RB30...

The VN 3.8 litre V6 gave a marketing advantage against the EA's 3.9 litre -even the optional multi-point version didn't even have a 'Get up and Go' of the VN V6.


It's just the noise of the first V6 that was really shocking and also in VN-P-R and that turned a lot of people against Holden's claiming that they were all just shocking harsh built backwards crap.

The metrosexuals all moved away form Holden's and started ranting about their Hondas and other Jap cars as being so much betterSick their love of little 4 cyl oh they are so good they say, but when I mentioned the V8's well metrosexuals mainly fear to go their. they are obsessed with other things than such performance. many do not values such performance.
When I talk to such they don't fathom were I am coming from at all the concept of V8's does not click in their world so when mentioning a VN they think only of the V6 and I say I am not talking about the V6 at all, I am Talking about V8's ! such is out of their league. truly ! I am not interested in anything other than V8's and all 4 cyl and 6 cyl are just shit to me, such is nothing that I would want to drive myself or would love to drive.
Oh oh I just driven a 4cyl car, let me tell you about it Eh? Speak to the hand Shhh Boo hoo! d'oh!

Ok the EA 3.9L 5sp was a good performing car in it's day and I would have that over a VN V6 5sp any day. but the EA 3SP auto was a total shit to endure, right from when you drove off in it you were thinking F off this is shit to drive such a thing, same with the VN V6 but only due to the chaff cutter noise that was embarrassing.
If you pulled up in a VN V8 and took a metrosexual for a spin, they would not bag such a car.
wbute Offline
#144 Posted : Monday, 19 April 2021 5:02:54 PM(UTC)
wbute

Rank: Veteran

Reputation:

Groups: Registered
Joined: 25/01/2010(UTC)
Posts: 1,110

Thanks: 1 times
Was thanked: 17 time(s) in 16 post(s)
I don’t believe they are a Buick motor if they were built by GMH in Australia are they? Is the Toyota 6 cylinder a Chev because it was based on a Chev design?
HK1837 Offline
#145 Posted : Monday, 19 April 2021 5:44:17 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
I think Buick design is a better term. Like a 307 in a HK is a SBC design not a Chevrolet engine as it wasn’t built by Chevrolet.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Dr Terry Offline
#146 Posted : Tuesday, 20 April 2021 7:52:16 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,015

Thanks: 1 times
Was thanked: 197 time(s) in 180 post(s)
I believe that the early V6 blocks & heads were imported from the USA, probably cast by GM-Powertrain. But a HK has said Buick design is a better term.

Dr Terry
If at first you don't succeed, just call it Version 1.0
wbute Offline
#147 Posted : Tuesday, 20 April 2021 8:04:33 AM(UTC)
wbute

Rank: Veteran

Reputation:

Groups: Registered
Joined: 25/01/2010(UTC)
Posts: 1,110

Thanks: 1 times
Was thanked: 17 time(s) in 16 post(s)
I never heard anyone call it a “Buick” engine until a couple of years ago. Now it’s on trend to call all V6 engines a Buick motor. Yet I have never heard anyone call a Rover V8 a Buick engine, which it most definitely was originally.
Just annoys me.
Smitty2 Offline
#148 Posted : Tuesday, 20 April 2021 9:34:24 AM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 347
Australia
Location: bayside Melbourne

Thanks: 216 times
Was thanked: 26 time(s) in 26 post(s)
Originally Posted by: wbute Go to Quoted Post
I don’t believe they are a Buick motor if they were built by GMH in Australia are they? Is the Toyota 6 cylinder a Chev because it was based on a Chev design?


Holden imported the V6 engines for first use in VNs from Buick in the USA (due to lack of time to tool up)
and then had duplicate tooling of what Buick used, sent out to allow manufacture here at Fishermens Bend.

Says to me they are Buick V6s

Club circuit racing...the best fun you can have with your pants on
castellan Offline
#149 Posted : Tuesday, 20 April 2021 11:26:02 AM(UTC)
castellan

Rank: Veteran

Reputation:

Groups: Registered
Joined: 26/02/2009(UTC)
Posts: 1,606

Thanks: 13 times
Was thanked: 27 time(s) in 25 post(s)
Originally Posted by: Smitty2 Go to Quoted Post
Originally Posted by: wbute Go to Quoted Post
I don’t believe they are a Buick motor if they were built by GMH in Australia are they? Is the Toyota 6 cylinder a Chev because it was based on a Chev design?


Holden imported the V6 engines for first use in VNs from Buick in the USA (due to lack of time to tool up)
and then had duplicate tooling of what Buick used, sent out to allow manufacture here at Fishermens Bend.

Says to me they are Buick V6s



Maybe then first V6 chaffcutters were a Buick imported engine.
Then we got another V6 upgrade in the VN that was quieter than the first and I do believe that the bolt paten in the intake valley is different ? from what I think I read in a open wheeler racing about such, I would have to fine the book about it, may be 20 years ago that I read that, not to mention some other differences with our V6, they were trying to swap parts and they just did not fit.

The Buick V6 has been around from 1970's I think, so many changes would of been made during them times to our VN V6.
Dr Terry Offline
#150 Posted : Tuesday, 20 April 2021 3:22:31 PM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,015

Thanks: 1 times
Was thanked: 197 time(s) in 180 post(s)
The Buick V6 & the Buick/Rover V8 were all part of the same family & date from the early 1960s (1960 for the V8 & 1962 for the V6).

GM sold the V8 design to Rover in the mid 60s & the V6 design to Jeep (pre-AMC) around 1967, them bought it back off AMC in the late 70s.

The V6 had has several refreshes in its lifetime. Just before we got it in the VN, a balance shaft was added, then we got the EcoTec update in the 1995, for the VS.

Dr Terry
If at first you don't succeed, just call it Version 1.0
HK1837 Offline
#151 Posted : Tuesday, 20 April 2021 5:05:27 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
Just reading about them, it very much parallels the SBC design. Originally designed for Buick application in the early 60’s it was later used for other GM platforms like Pontiac, Olds etc. The SBC was the same, used by Pontiac, Studebaker, Ramsay, GMH etc. it probably was no different to the GM Powertrain V8 often called a GenII SBC design engine, mid VN the engine would have been manufactured by GM Powertrain just like the gearboxes.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Shearer Offline
#152 Posted : Tuesday, 20 April 2021 7:15:54 PM(UTC)
Shearer

Rank: Member

Reputation:

Groups: Registered
Joined: 8/11/2009(UTC)
Posts: 122
Man

Thanks: 1 times
Originally Posted by: castellan Go to Quoted Post
Originally Posted by: Smitty2 Go to Quoted Post
Originally Posted by: wbute Go to Quoted Post
I don’t believe they are a Buick motor if they were built by GMH in Australia are they? Is the Toyota 6 cylinder a Chev because it was based on a Chev design?


Holden imported the V6 engines for first use in VNs from Buick in the USA (due to lack of time to tool up)
and then had duplicate tooling of what Buick used, sent out to allow manufacture here at Fishermens Bend.

Says to me they are Buick V6s



Maybe then first V6 chaffcutters were a Buick imported engine.
Then we got another V6 upgrade in the VN that was quieter than the first and I do believe that the bolt paten in the intake valley is different ? from what I think I read in a open wheeler racing about such, I would have to fine the book about it, may be 20 years ago that I read that, not to mention some other differences with our V6, they were trying to swap parts and they just did not fit.

The Buick V6 has been around from 1970's I think, so many changes would of been made during them times to our VN V6.


There where two revision to the V6 during the VN production run; first was around September '89 and the commonly known 'VP motor' update in November '90. This update has thermostat at the front of the motor unlike the previous version which is under the throttle body -more suitable for a FWD layout. Somewhere on my hard drive a actually have the dates and changes occurred.

This later manifold does fit the earlier motor, the only modification is a breather hole drilled in each head. I did this to my own VN when I rebuilt the engine.

I've played with a few of these Buick V6s, but still don't know when Australia production occurred.. educated guess would be VN's updated VP motor?
HK1837 Offline
#153 Posted : Tuesday, 20 April 2021 7:45:37 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
According to this the VN engine was an LN3 and the VNII was an L27. Not sure if you can always believe everything in Wiki though.

https://en.m.wikipedia.org/wiki/Buick_V6_engine
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
wbute Offline
#154 Posted : Tuesday, 20 April 2021 8:02:56 PM(UTC)
wbute

Rank: Veteran

Reputation:

Groups: Registered
Joined: 25/01/2010(UTC)
Posts: 1,110

Thanks: 1 times
Was thanked: 17 time(s) in 16 post(s)
Originally Posted by: Dr Terry Go to Quoted Post
The Buick V6 & the Buick/Rover V8 were all part of the same family & date from the early 1960s (1960 for the V8 & 1962 for the V6).

GM sold the V8 design to Rover in the mid 60s & the V6 design to Jeep (pre-AMC) around 1967, them bought it back off AMC in the late 70s.

The V6 had has several refreshes in its lifetime. Just before we got it in the VN, a balance shaft was added, then we got the EcoTec update in the 1995, for the VS.

Dr Terry


The Rovef V8 was never referred to as a Buick engine, even though it is as Buick as our Holden V6.
Dr Terry Offline
#155 Posted : Wednesday, 21 April 2021 7:54:46 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,015

Thanks: 1 times
Was thanked: 197 time(s) in 180 post(s)
Originally Posted by: wbute Go to Quoted Post

The Rovef V8 was never referred to as a Buick engine, even though it is as Buick as our Holden V6.


In England during the 60s it was well known & often referred to as the Buick V8. Even the models it was fitted to (Rover P5B & P6B) have B in the model code to denote the Buick engine.

This has disappeared over time though.

It's probably a bit less 'Buick' than our V6 though, AFAIK the Rover version was built entirely by Rover.

Dr Terry

Edited by user Wednesday, 21 April 2021 10:06:31 AM(UTC)  | Reason: Not specified

If at first you don't succeed, just call it Version 1.0
HK1837 Offline
#156 Posted : Wednesday, 21 April 2021 10:36:47 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
Reading further in that Wiki link, we got the revised "Series 1" L27 3800 mid VN but in Australia it retained the old LN3 one piece intake/plenum. I assume Holden did this to keep a lot of parts common with the earlier VN engine? Doe sthis hint that the earlier engine in VN was mostly imported but the later ones were built here? Or is it not that simple!
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Dr Terry Offline
#157 Posted : Wednesday, 21 April 2021 12:22:15 PM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,015

Thanks: 1 times
Was thanked: 197 time(s) in 180 post(s)
Originally Posted by: Shearer Go to Quoted Post

There where two revision to the V6 during the VN production run; first was around September '89 and the commonly known 'VP motor' update in November '90. This update has thermostat at the front of the motor unlike the previous version which is under the throttle body -more suitable for a FWD layout. Somewhere on my hard drive a actually have the dates and changes occurred.


Yeah there were 2 revisions of the V6 in VN.

VN Series 2 (XX8) saw the first upgrade. It came into production in late 1989. Most of the changes were internal, they still looked the same. The only change externally was that they added an overflow bottle to catch coolant from the pressure cap on the surge tank, so there were 2 coolant 'bottles'.

The VP (L27) motor came into production 13 Nov 1990 , half way thru VN Series 2. This is where they cleaned up the whole coolant system plumbing & relocated the thermostat to the front.

Dr Terry
If at first you don't succeed, just call it Version 1.0
castellan Offline
#158 Posted : Thursday, 22 April 2021 11:22:17 AM(UTC)
castellan

Rank: Veteran

Reputation:

Groups: Registered
Joined: 26/02/2009(UTC)
Posts: 1,606

Thanks: 13 times
Was thanked: 27 time(s) in 25 post(s)
I wonder how the first series VN V6 headed system lasted before Holden put the cast iron ones on them.

That open wheeler V6 I still have not found the book but the V6 they were talking about must of been the 4th generation of the V6 in the USA and ours is the 5th generation in the VN.

I remember my VS V6 5sp sitting on the highway over 140km/h to 160km/h the air-con would cut out, that pissed me off. the computer cuts out the air-con when it drops below a set vacuum reading, this was to give more response in overtaking, so it happens automatically, that's fine. tho it should not of been linked to top gear. my wife's VS V6 auto did the same cut out thing, most would not even know such takes place. but when I got the VS V8 it did not have that function so you could drive flat out and the air-con still worked regardless. the Same with my VY SS.

The car I have now I press the air-con button off before I over take.
HK1837 Offline
#159 Posted : Thursday, 22 April 2021 6:04:29 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
Haha, yes. The little over-pressurised tiny diesels pumping out crazy torque figures that can supposedly tow 3500kg. Like hell they can. Can’t hold the speed limit up hills and if the aircon is on they go even slower!
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
Smitty2 Offline
#160 Posted : Thursday, 22 April 2021 8:01:02 PM(UTC)
Smitty2

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2019(UTC)
Posts: 347
Australia
Location: bayside Melbourne

Thanks: 216 times
Was thanked: 26 time(s) in 26 post(s)
Originally Posted by: castellan Go to Quoted Post
I.............................. when I got the VS V8 it did not have that function so you could drive flat out and the air-con still worked regardless. the Same with my VY SS.



you have obviously never exceeded 4500rpm in either vehicle Brick wall

My VN V8 berlina and VR SS and VS HSV Improved V8 Berlina
and my VX and VZ SS Commodores.. all had the one same factory
redeeming feature!

Exceed 4500 rpm .... in ANY gear (all were manual vehicles) and irrespective of speed
the aircon turns off Sick

My 2 VE Clubsports and current VF Clubsport... ditto

great factory feature ! Boo hoo!

Edited by user Thursday, 22 April 2021 8:02:47 PM(UTC)  | Reason: Not specified

Club circuit racing...the best fun you can have with your pants on
Users browsing this topic
Guest
11 Pages«<678910>»
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.168 seconds.