Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
HK HEADLIGHT ISSUE - Blowing high beam
Options Go to last post Go to first unread
Previous Topic Next Topic
DGHKGTS Offline
#1 Posted : Thursday, 14 July 2022 7:17:23 PM(UTC)
DGHKGTS

Rank: Member

Reputation:

Groups: Registered
Joined: 20/05/2022(UTC)
Posts: 13
Australia
Location: Queensland

Thanks: 1 times
I have a HK that is blowing the RH headlight when going on high beam
It blows the low beam and only does it to the RH light
The earth is ok
Any ideas
Thanks
Back to top
WWW
Dr Terry Offline
#2 Posted : Friday, 15 July 2022 12:30:33 PM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058

Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
I don't quite understand. Are you saying that every time you switch to hi-beam, the RH low-beam filament burns out ?

Dr Terry
If at first you don't succeed, just call it Version 1.0
Back to top
DGHKGTS Offline
#3 Posted : Monday, 25 July 2022 8:30:03 PM(UTC)
DGHKGTS

Rank: Member

Reputation:

Groups: Registered
Joined: 20/05/2022(UTC)
Posts: 13
Australia
Location: Queensland

Thanks: 1 times
Sorry for late reply
Yep that’s exactly what happens and only the drivers side ??!
And it’s hard to test any diagnostics coz I blow a headlight?

Edited by user Monday, 25 July 2022 8:32:24 PM(UTC)  | Reason: Not specified
Back to top
WWW
Dr Terry Offline
#4 Posted : Tuesday, 26 July 2022 8:05:03 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058

Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
A very strange phenomenon.

Assuming your alternator charge rate isn't going over 14.2 volts & you're using quality globes, I can't explain it.

Dr Terry
If at first you don't succeed, just call it Version 1.0
Back to top
DGHKGTS Offline
#5 Posted : Tuesday, 26 July 2022 6:04:19 PM(UTC)
DGHKGTS

Rank: Member

Reputation:

Groups: Registered
Joined: 20/05/2022(UTC)
Posts: 13
Australia
Location: Queensland

Thanks: 1 times
Yep got me stumped
I was thinking maybe the dipper switch is playing up
But can’t attribute that to just the RH headlight and the spike in voltage to take out the low beam
To get lights I have to go back to low beam and hot wire from the low beam plug to the high beam prong
It’s nuts
Back to top
WWW
202tonner Offline
#6 Posted : Tuesday, 26 July 2022 9:38:37 PM(UTC)
202tonner

Rank: Member

Reputation:

Groups: Registered
Joined: 21/12/2018(UTC)
Posts: 91
Australia
Location: SA

Thanks: 22 times
Was thanked: 11 time(s) in 11 post(s)
Some random thoughts which may (or may not) help. I'm not familiar with HK electrics so adapt as required.

Pull the connector off the headlight and connect a multimeter, fuse or test light to each terminal. See what happens. Maybe measure the voltage and amps when you turn the lights on or flip from high to low and back again? Do the same with the dip switch. Could it be a fault in the headlight switch?
Try and find out what is happening. Do it with the engine running as well as turned off. Dunno. Sounds very irritating so good luck.
Back to top
 1 user thanked 202tonner for this useful post.
DGHKGTS on 28/07/2022(UTC)
KBM Offline
#7 Posted : Wednesday, 27 July 2022 8:27:55 AM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
Could the right low beam be acting like a fuse if the dip switch is shorting when pressed
Back to top
wbute Offline
#8 Posted : Wednesday, 27 July 2022 12:00:16 PM(UTC)
wbute

Rank: Veteran

Reputation:

Groups: Registered
Joined: 25/01/2010(UTC)
Posts: 1,124

Thanks: 1 times
Was thanked: 18 time(s) in 17 post(s)
Check the connection on the headlight is not shorting out.
Back to top
DGHKGTS Offline
#9 Posted : Thursday, 28 July 2022 6:32:36 PM(UTC)
DGHKGTS

Rank: Member

Reputation:

Groups: Registered
Joined: 20/05/2022(UTC)
Posts: 13
Australia
Location: Queensland

Thanks: 1 times
Thanks everyone for the tips
I will give those things a go and see what happens

Won’t be in the shed until mid next week
So will post how it goes
Thanks again
Back to top
WWW
DGHKGTS Offline
#10 Posted : Monday, 12 September 2022 5:32:43 PM(UTC)
DGHKGTS

Rank: Member

Reputation:

Groups: Registered
Joined: 20/05/2022(UTC)
Posts: 13
Australia
Location: Queensland

Thanks: 1 times
Hi All
I replaced the headlight switch as I think the bio strip for the headlights in the switch may have been the problem
The connector plug on the right side near accelerator pedal was played with

I put a couple of test lights on the right hand headlight plug and they are dipping from test light to test light from high to low beam

So all seems to be working ok 👍🏻
Thanks heaps for the input
Thanks Again
Back to top
WWW
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.039 seconds.