Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.
Replacing HJ Door Locks
Options Go to last post Go to first unread
Previous Topic Next Topic
Taztiger4 Offline
#1 Posted : Monday, 15 May 2023 8:59:22 PM(UTC)
Taztiger4

Rank: Member

Reputation:

Groups: Registered
Joined: 15/09/2022(UTC)
Posts: 84
Australia
Location: Perth

Thanks: 37 times
Any tricks or pitfalls ?

Cheers
Back to top
Dr Terry Offline
#2 Posted : Wednesday, 17 May 2023 7:41:55 AM(UTC)
Dr Terry

Rank: Veteran

Reputation:

Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,058

Thanks: 1 times
Was thanked: 203 time(s) in 184 post(s)
A little more info might help.

Are you talking about the latch mechanism inside the door or the lock barrel ?

Dr Terry
If at first you don't succeed, just call it Version 1.0
Back to top
 1 user thanked Dr Terry for this useful post.
Taztiger4 on 17/05/2023(UTC)
Taztiger4 Offline
#3 Posted : Wednesday, 17 May 2023 9:28:46 PM(UTC)
Taztiger4

Rank: Member

Reputation:

Groups: Registered
Joined: 15/09/2022(UTC)
Posts: 84
Australia
Location: Perth

Thanks: 37 times
Originally Posted by: Dr Terry Go to Quoted Post
A little more info might help.

Are you talking about the latch mechanism inside the door or the lock barrel ?

Dr Terry


Apologies, I am talking about the actual lock barrel

cheers
Back to top
KBM Offline
#4 Posted : Thursday, 18 May 2023 10:25:25 AM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
the barrels are fairly straightforward. there's a retaining clip at the back of the barrel that usually slides towards the inside of the door, there's a grab point on the clip. the barrel then pulls out. only thing to watch for is left and right as they're off set at the rear of the barrel so don't put them in upside down.
Back to top
 1 user thanked KBM for this useful post.
Taztiger4 on 18/05/2023(UTC)
Taztiger4 Offline
#5 Posted : Thursday, 18 May 2023 9:22:55 PM(UTC)
Taztiger4

Rank: Member

Reputation:

Groups: Registered
Joined: 15/09/2022(UTC)
Posts: 84
Australia
Location: Perth

Thanks: 37 times
Originally Posted by: KBM Go to Quoted Post
the barrels are fairly straightforward. there's a retaining clip at the back of the barrel that usually slides towards the inside of the door, there's a grab point on the clip. the barrel then pulls out. only thing to watch for is left and right as they're off set at the rear of the barrel so don't put them in upside down.


Thanks very much.

I have the 2 new barrels & they are identical !

Looks like the Z bracket held on by the 3 pronged clip can be moved 180deg to fit either door.

I am assuming the flat part of the key is at the top as it goes into the barrel ?

TIA
Back to top
Sandaro Offline
#6 Posted : Thursday, 18 May 2023 10:27:42 PM(UTC)
Sandaro

Rank: Member

Reputation:

Groups: Registered
Joined: 3/10/2015(UTC)
Posts: 315

Thanks: 3 times
Was thanked: 35 time(s) in 34 post(s)
Yes, all my old holdens always had the flat/straight edge of the key upwards.
Back to top
 1 user thanked Sandaro for this useful post.
Taztiger4 on 18/05/2023(UTC)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.056 seconds.