Rank: Member
Groups: Registered
Joined: 28/05/2016(UTC) Posts: 43 ![Australia]( "Australia") Location: Sydney Thanks: 8 times
Was thanked: 3 time(s) in 3 post(s)
|
Are there any recommended local manufacturers of sumps, for a Holden 308, that offer a good fit to the block? It doesn't need to be a high capacity type but internal baffles would be nice. If not, is there a better other source? edit: For an HX. Edited by user Monday, 15 April 2024 9:31:48 AM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Joined: 15/11/2023(UTC) Posts: 7 ![Australia]( "Australia")
|
ASR sumps are locally made and are good quality.
|
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,728
Thanks: 1 times
Was thanked: 513 time(s) in 489 post(s)
|
|
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/05/2016(UTC) Posts: 43 ![Australia]( "Australia") Location: Sydney Thanks: 8 times
Was thanked: 3 time(s) in 3 post(s)
|
I'm currently sourcing an original sump to see if it also leaks at the rear. I originally thought it was the rear main (when running in the engine) but it turns out that the "locally manufactured" sump doesn't seal well. I'm using a rubber gasket with a bead of silicon on each of the metal mating surfaces. It is a sump with a higher capacity and internal baffles.
Before naming the manufacturer I want to check with an OE sump and wanted to research other known good sump suppliers. This post was inspired after speaking with the manufacturer and hearing them say "pressed steel pans are not very good", yet that is what they sold me under the banner of high quality.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/07/2019(UTC) Posts: 385 ![Australia]( "Australia") Location: bayside Melbourne Thanks: 238 times
Was thanked: 28 time(s) in 28 post(s)
|
Originally Posted by: Chris W  ASR sumps are locally made and are good quality. I use ASR (had several versions) on my race engines... top quality (and they come with matching pickup and dipstick) have had a few other brands...but the later standard factory sumps with baffle and scraper is actually better (with a guaranteed fit and a pickup that matches)   |
Club circuit racing...the best fun you can have with your pants on |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
