Rank: Member
Groups: Registered
Joined: 26/09/2010(UTC) Posts: 13
|
I there i have a HZ with the woodgrain statesman dash which i am trying to remove, however i seem to be stuck with the headlight knob. Can anyone please tell me how to remove the knob so the dash will come out. thanks
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC) Posts: 14,720
Thanks: 1 times Was thanked: 512 time(s) in 488 post(s)
|
With the lower facia removed feel up around the switch. There is a button on it that you have to press. Been ages since I did it so I can't remember exacty where it is, but I think it is on the driver's side. From memory you pull the switch out to ON and press the button and the switch and shaft come out. If you have trouble press the button with it off and then pull it out. Then use a big flat blade screwdriver to undo the nut around the hole where the shaft came from.
_______________________________________________________ If we all had the same (good) taste, who would buy all the Fords? |
_______________________________________________________ If we all had the same (good) taste, who would buy all the Fords? |
|
|
|
Rank: Member
Groups: Registered
Joined: 26/09/2010(UTC) Posts: 13
|
cheers mate ill give it a go
|
|
|
|
Rank: Veteran
Groups: Veteran, Registered
Joined: 25/11/2008(UTC) Posts: 1,496
|
the switch needs to be in the park light position
there's a spring loaded button on the side of the switch under the dash facing the passenger side of the car, it needs to be pushed in while pulling the knob out, just remember to have the switch in the park light position first
|
|
|
|
Rank: Member
Groups: Registered
Joined: 26/09/2010(UTC) Posts: 13
|
cheers davequey74 and HK1837 all out
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.