Rank: Member
Groups: Moderator, Registered
Joined: 22/04/2010(UTC)
Posts: 473
|
quote:
Originally posted by Holden1Tonner
I'm running as much advance as possible, without getting any pinging under full load, but I have no idea how much that is. The issue is that with this configuration, she needs to be cranked over at least 3 revolutions to start. If I decrease the advance she starts right away but I don't feel that I've got the same power / efficiency. I want to log this properly and therefore I need to know the exact timing.
that why you get a regraphed dizzy, they change the springs/weights etc and can change the curve that the dizzy advances on, so you can have a good base timing but have it advance more as your driving to get you to the same total advance as you used to have with the higher base timing. get a timing gun and check what the timing advance is at a higher rpm on your good current setting, you should be able to see how many degrees it advances to
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 26/05/2011(UTC)
Posts: 33
|
quote:
Originally posted by Holden1Tonner
so what would be the approximate factory number then? 10 degrees or 30 degrees?
about 10 static and 34 total. I think the VL had about 6 static but can't remember.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/06/2011(UTC)
Posts: 61
|
|
"I killed the Bank"
Andrew Jackson, last words |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/06/2011(UTC)
Posts: 61
|
G'day Gents,
I've been driving the HQ around for quite some time now and am wondering whether or not I should switch to an EFI system.
I'm looking at Holley and Edelbrock EFI systems. Can anyone here let me know whether or not the Holden engine can accept a standard Chevy intake?
|
"I killed the Bank"
Andrew Jackson, last words |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 28/06/2011(UTC)
Posts: 61
|
Just to give you an update, I've started a post here on what I want to do: http://www.chevytalk.org...2242833/post/last/#LAST
|
"I killed the Bank"
Andrew Jackson, last words |
|
|
|
|
|
Rank: Veteran
Groups: Moderator, Registered
Joined: 1/03/2005(UTC)
Posts: 6,057
Thanks: 1 times
Was thanked: 201 time(s) in 183 post(s)
|
quote:
Originally posted by Holden1Tonner
I'm looking at Holley and Edelbrock EFI systems. Can anyone here let me know whether or not the Holden engine can accept a standard Chevy intake?
No, the Holden V8 & the SB Chev are totally different designs. Dr Terry. |
If at first you don't succeed, just call it Version 1.0 |
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
